User manual PHOENIX GOLD OCTANE

[. . . ] · 24dB per octave, high pass and low pass crossover. Continuously variable from 40Hz to 800Hz. · Twin-TTM bass boost circuit provides up to 18dB of boost at 45Hz. [. . . ] The High and Low Pass sections have seperate sensitivity levels. B- TERMINAL (CHASSIS GROUND) Connect to a clean, solid chassis ground. Remove all paint and dirt from the chassis connection point. B+ TERMINAL (BATTERY POSITIVE) Connect directly to the positive battery terminal. Remember to properly fuse the High Pass B+ input cable within 18 inches of the amplifier and positive battery terminal. Section Outputs High Pass 4 ohms stereo High Pass 2 ohms stereo High Pass 4 or 2 ohms bridged Fuse size 50 amp 60 amp 60 amp TWIN-TTM BASS EQ This control allows up to 18dB of boost at 45Hz for the speaker outputs. Every 3dB of boost requires double the power at 45Hz. BASS CUBE INPUT and CONTROLS Connect the remote control unit for the bass cube to the telephone style input. For more information on the functions and specficiations for setup and functions refer to the included bass cube manual. *Notes Prior to Installation: The bass cube will only effect the low pass section of the amplifier. Both power terminals must be wired to the appropriate sources for the both sections of amplifier to operate correctly. The crossover for High and Low Pass speakers is always activated. The internal capacitor bank automatically charges and discharges, so there is no need for external charging. B- TERMINAL (CHASSIS GROUND) Connect to a clean, solid chassis ground. Remove all paint and dirt from the chassis connection point. B+ TERMINAL (BATTERY POSITIVE) Connect directly to the positive battery terminal. Remember to properly fuse the High Pass B+ input cable within 18 inches of the amplifier and positive battery terminal. Section Low Pass Low Pass Low Pass Outputs 4 ohms stereo 2 ohms stereo 4 or 2 ohms bridged Fuse size 50 amp 60 amp 60 amp REMOTE DIAGNOSTIC DISPLAY PORT This port is for connecting the optional RDDP or SDT remote monitoring kit. The RDDP display indicates the amplifier's condition and voltage with tri-color LEDs. While the SDT includes a DC voltmeter and a tri-color status LED. REMOTE TURN-ON TERMINAL Connect to a switched 12 Vdc source such as the headunit's "remote" or power antenna wire. REMOTE TURN-ON TERMINAL Connect to a switched 12 Vdc source such as the headunit's "remote" or power antenna wire. Continuous Output Power at 1% THD (watts): Into 4 ohms Stereo @ 12. 5 Vdc (IASCA/USAC) . [. . . ] This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures resulting from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, modification, service by anyone other than Phoenix Gold, or damage that is attributable to Acts of God. It does not cover costs of transportation to Phoenix Gold or damage in transit. [. . . ]