User manual PIONEER AVD-W6010

[. . . ] This product conforms to new cord colors. Read this manual fully and carefully before operating your display. Keep this manual handy for future reference. Pay close attention to all warnings in this manual and follow the instructions carefully. [. . . ] The marks indicating the current ambient brightness used for adjusting [BRIGHT] and [CONTRAST] may differ slightly. The external light level can be adjusted to Dark, Intermediate or Bright and the each setting saved. To view videos by a VCR, DVD player or any other kind of equipment connected to the hide-away unit. Each press of the 2 or 3 button selects the source in the following order: VCR1: [VIDEO] = [S-VIDEO] = Exit to [VIDEO] VCR2: [NO SELECT] = [VIDEO] = [S-VIDEO] = Exit to [NO SELECT] Note: If the equipment is connected to a RCA video input, choose [VIDEO] to view video of the equipment. If the equipment is connected to a S-VIDEO input, choose [S-VIDEO] to view video of the equipment. Both the audio of Navigation unit guide and the audio from video equipment, etc. , can be output from the built-in speaker. When connecting the mobile navigation unit to RGB input of this hide-away unit, you can select ON/OFF for the guidance voice from mobile navigation unit. When mixing ON, this mark is turned red. [ON]: The navigation's guidance voice is output at the same time as audio from another source. [OFF]: The navigation's guidance voice is not output. This product features a function that automatically switches to the video input into the VCR1 jack when a back-up camera is installed on your car. The LCD screen of this product is exposed to improve view ability in the vehicle. If the display is near the vent of an air conditioner when it is deployed, make sure that air from the air conditioner is not blowing on it. Heat from the heater may break the LCD screen, and cool air from the cooler may cause moisture to form inside the display resulting in possible damage. Also, if the display is cooled down by the cooler, the screen may become dark, or the life span of the small fluorescent tube used inside the display may be shortened. Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a problem with the display. At low temperatures, the LCD screen may be dark for a while after the power is turned ON. When removing dust from the screen or cleaning the display, first turn the system power OFF, then wipe with a soft dry cloth. When wiping the screen, take care not to scratch the surface. A small fluorescent tube is used inside the display to illuminate the LCD screen. [. . . ] * Where the front of the car is within the driver's field of vision when looking at the display. * Where the display does not protrude above the front of the hood as viewed by the driver. Make temporary connections first to check that the unit and system are working properly. Press with the tip of a ball-point pen or similar object, when a connection is completed. [. . . ]