User manual PIONEER AVH-P4950DVD

[. . . ] Operation Manual DVD AV RECEIVER AVH-P4950DVD English Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Digital Signal Processor 58 Be sure to read this !When an operation is prohibited 8 Precautions IMPORTANT SAFEGUARDS 3 To ensure safe driving 3 To avoid battery exhaustion 4 Before You Start About this unit 5 Visit our website 6 Features 6 About WMA 7 To protect the LCD screen 8 For viewing LCD comfortably 8 What the marks on DVDs indicate 8 Protecting your unit from theft 8 Resetting the microprocessor 9 Use and care of the remote control 9 Operating this unit What's What 11 Basic Operations 16 Tuner 21 Built-in DVD player 23 Audio Adjustments 33 Setting up the DVD player 38 Initial Settings 42 Other Functions 45 Available accessories Playing songs on iPod 49 Multi-CD Player 51 DVD Player 54 TV tuner 56 Additional Information Troubleshooting 70 Error messages 72 Understanding auto TA and EQ error messages 72 Understanding messages 73 Handling guideline of discs and player 74 DVD discs 74 AVCHD recorded discs 74 CD-R/CD-RW discs 74 Dual Discs 75 Compressed audio files on the disc 75 Using the display correctly 76 Language code chart for DVD 78 Terms 79 Specifications 82 Index 84 2 En Section Precautions 01 Precautions IMPORTANT SAFEGUARDS Please read all of these instructions regarding your display and retain them for future reference. 1 Read this manual fully and carefully before operating your display. 2 Keep this manual handy as a reference for operating procedures and safety information. [. . . ] This function is initially set to AUTO so that this unit automatically adjusts the TV signal setting. 1 Touch NEXT on the initial menu. 2 Touch TEL/GUIDE to select any of the muting, attenuation or off. Touch TEL/GUIDE until the desired setting appears in the display. 44 En Section Operating this unit 03 2 Touch TV SIG to select an appropriate TV signal. Touching TV SIG switches TV signal settings in the following order: AUTO--PAL--NTSC--PAL-M--SECAM Note About your country TV signal, consult with your nearest Pioneer dealer. Other Functions Introduction of setup adjustments Operating this unit Important Following function cannot be operated in your area. (Inoperable function is indicated in grayscale. ) -- R. DISP 1 1 Setup menu display Shows the setup function names. % Press A. MENU button and touch SETUP to display the setup function names. The setup function names are displayed and operable ones are highlighted. # To return to the previous display, touch BACK. # To return to the display of each source, touch ESC. Note If you do not operate the setup function within about 30 seconds, the display is automatically returned to the source display. Setting the AV input You can switch the setting according to the connected component. Select VIDEO to watch video of a connected component as AV source. Select M-DVD to watch video of a connected DVD player as S-DVD source. En 45 Section 03 Operating this unit !Select EXT-V to watch video of a connected video unit as EXT source. % Touch AV IN on the setup menu to select the AV input setting. Touch AV IN until the desired setting is selected. !OFF ­ No video component connected !VIDEO ­ External video component (such as portable video player) !M-DVD ­ Multi-DVD player connected with RCA cable !EXT-V ­ External video unit (such as Pioneer products available in the future) # When a multi-DVD player is connected with an AV-BUS cable, do not select M-DVD otherwise no picture will be displayed even if you select S-DVD. !After you set up the rear view camera setting, move the gear shift in REVERSE (R) and confirm if a rear view camera video can be shown on the display. If the display should be switched to a rear view camera video by error while you are driving forward, change the rear view camera setting. To end watching a rear view camera video and return to the source display, press V. ADJ. 1 Touch B-CAM on the setup menu. 2 Touch c to turn rear view camera setting on. # To turn rear view camera setting off, touch d. Setting for rear view camera (back up camera) CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise screen image may appear reversed. Important Following functions cannot be operated in your area. [. . . ] 0. 008 % (1 kHz) Output level: Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 0 Vp-p/75 W (±0. 2 V) Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 0 V (1 kHz, 0 dB) Number of channels . . . . . . . . . . . . . . 2 (stereo) MP3 decoding format . . . . . . . . . . . [. . . ]