User manual PIONEER AVH-P6800DVD

[. . . ] € To avoid the risk of accident and the potential violation of applicable laws, the front DVD or TV (sold separately) feature should never be used while the vehicle is being driven. Also, Rear Displays should not be in a location where it is a visible distraction to the driver. € In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this unit's DVD features should not be used. [. . . ] Please ground this lead separately from the ground of high-current products such as power amps. If you ground the products together and the ground becomes detached, there is a risk of damage to the products or fire. This product conforms to new cord colors. € Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both products and connect cords that have the same function. printed in Japan Imprimé au Japon <CRD4074-A> RE <KNNNF> <06C00000> T T Fig. 1 Connecting the Units Connecting the power cord 20 cm Note: Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*. 1* 3* 2* Blue This product This product 5* 4* IP-BUS cable Multi-CD player (sold separately) Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections. 15 cm AUX input jack Subwoofer output or non fading output (SUBWOOFER OUTPUT or NON-FADING OUTPUT) 23cm <ENGLISH> When connecting to separately sold power amp Power amp (sold separately) Power amp (sold separately) Cap (1*) When not using this terminal, do not remove the cap. Yellow (3*) Back-up (or accessory) Connect leads of the same color to each other. Fuse holder (10 A) Power amp (sold separately) Yellow (2*) To terminal always supplied with power regardless of ignition switch position. Note: • The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer. Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. When you connect the separately sold multi-channel processor (e. DEQ-P6600) to this unit, do not connect anything to the speaker leads and system remote control (blue/white). Parking brake switch Note : When you connect the multi-channel processor to this unit, a separately sold power amp must be connected to the multi-channel processor. Note : Change the initial setting of this product (refer to the Operation Manual). The subwoofer output of this unit is monaural. [. . . ] € Do not install the display where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including air bags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. € The semiconductor laser will be damaged if it overheats, so don’t install the unit anywhere hot — for instance, near a heater outlet. € If installation angle exceeds 30° from horizontal, the unit might not give its optimum performance. 9) <ENGLISH> Installing the remote control unit When not using the remote control unit, secure it with velcro tape to prevent it from moving. [. . . ]