User manual PIONEER AVH-X5700BT

[. . . ] English DVD RDS AV RECEIVER AVH-X5700DAB AVH-X3700DAB AVH-X2700BT Operation Manual Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Before using this product, be sure to read and fully understand the following safety information: ● Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. [. . . ] 3 Touch or balance. to adjust the left/right speaker p If you directly touch the area where the cursor can be moved, the SLA setting will be changed to the value of the touched point. p “+4” to “–4” is displayed as the source volume is increased or decreased. p The default setting is “0”. 4 Touch or to adjust the source volume. 1 Display the “Audio” setting screen. 2 Touch [Subwoofer] to switch “On” (default) or “Off”. p “Left25” to “Right25” is displayed as the left/right speaker balance moves from the left to right. p The default setting is “L/R 0”. Using the auto level control This function corrects automatically the audio level difference between the music files or the sources.  Displaying the “Audio” setting screen on page 42 Adjusting the cutoff frequency value You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: Standard Mode: Front, Rear, Subwoofer. p “Subwoofer” is available only when “Subwoofer” is “On”.  Using the subwoofer output on page 42  Displaying the “Audio” setting screen on page 42  You can also set the fader/balance by dragging the point on the displayed table. 1 Display the “Audio” setting screen. 2 Touch [Automatic Level Control]. Switching sound muting/ attenuation 42 You can automatically mute or attenuate the AV source volume and the iPhone application volume when the navigation outputs the guidance voice. 1 Display the “Audio” setting screen. ● Off (default): Turns the auto level control setting off. ● Mode1: 3 Touch the item. 2 Touch [Crossover] or [Subwoofer Settings]. to switch the speaker you want Audio adjustments p The following items can also be set. ● : Switches the subwoofer phase between normal and reverse position. ● LPF/HPF: Switches the LPF/HPF setting to “On” or “Off”. 4 Drag the graph lines to the position you want to adjust. p “All” is not available when “Network Mode” is selected as the speaker mode. Adjusting the speaker output levels finely Fine adjustments of the speaker output level can be made by listening to audio output. p This function is available when “Subwoofer” is set to “On”.  Using the subwoofer output on page 42  Displaying the “Audio” setting screen on page 42 Off (default), Front, Front Left, Front Right, All. p “All” is not available when “Network Mode” is selected as the speaker mode. p If you change the listening position setting, the output levels of all the speakers will change in conjunction with the setting.  This function is not available when adjusting the High speaker.  Touch or to switch the adjusting speaker. 1 Display the “Audio” setting screen. 3 Touch or if necessary. p You can input the value every 2. 5 cm (between 0 and 350 cm). The following speakers are available: Front Left, Front Right, Rear Left, Rear Right, Subwoofer 5 Touch or to input the distance between the selected speaker and the listening position. Switching the rear speaker output 1 Turn the source off.  Displaying the “Audio” setting screen on page 42  If you touch [TA On], the time alignment is turned off mandatorily.  This function is available only when the listening position setting is set to “Front Left” or “Front Right”.  To use this function, the vehicle’s acoustics must be measured in advance. to select the listening position 2 Display the “Audio” setting screen. [. . . ] MSC (Mass Storage Class), MTP (Media Transfer Protocol) File system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FAT16, FAT32 MP3 decoding format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . MPEG-1 & 2 Audio Layer 3 WMA decoding format. . . . . . . . . Ver. 7, 7. 1, 8, 9, 10, 11, 12 (2 ch audio) (Windows Media Player) AAC decoding format. . . . . . . . . . . . . 10. 6 and earlier) WAV signal format (MSC Mode only). . . . . . . . . . . . . . . . . . . . . . . . . . . . Linear PCM Sampling Frequency. . . . . . . . . . Linear PCM: 16 kHz, 22. 05 kHz, 24 kHz, 32 kHz, 44. 1 kHz, 48 kHz JPEG decoding format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]