User manual PIONEER AVIC-F950DAB

[. . . ] € Do not operate the DVD Navigation Unit if doing so will divert your attention from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. € This manual explains how to install this DVD Navigation Unit in your vehicle. Operation of this DVD Navigation Unit is explained in the separate Operation Manual that also came with this unit. [. . . ] DEUTSCH Yellow/black When combining this navigation unit with a Pioneer car stereo, if the car stereo has yellow/black leads, connect them to those leads. This way when the guidance audio is output and when you operate the system by voice, the vehicle stereo is automatically muted to reduce the vehicle stereo volume. E of Purple/white (REVERSEGEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the purple/white lead to the lead whose voltage changes when the reverse gear is engaged. If this is not connected, the sensor inside this unit will determine whether your vehicle is travelling forwards or backwards. Note: When you use the ND-PG 1 speed pulse generator (sold separately), please make sure to connect it. NEDERLANDS Check the position of your vehicle’s reversing lamp (the one that lights up when the gearstick is in reverse [R]) and find the reversing lamp lead in the trunk. 8 9 ENG/MASTER 96 CRD3456A/001-027/UK 5/15/01 10:57 PM Page 10 Connecting the System Connecting the power cord (2) This product Note: Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. power cord Black To vehicle (metal) body. To keep electromagnetic noise from the vehicle body out of the mobile navigation system, attach this lead near the main unit. Do not bind them together, lay them together, or cross them. Such electromagnetic noise would increase the error for the location display. Before installing and fixing • Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. € Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. Before using the adhesive tape • Make sure the surface is free of moisture, dust, grime, oil, etc. 11 ENG/MASTER 96 12 CRD3456A/001-027/UK 5/15/01 10:57 PM Page 13 Installing the main unit ENGLISH Installation notes • Do not install the main unit in places where it may become subject to high temperatures or humidity, such as: * Places close to a heater outlet. * Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf. € Places that may be splashed by rain, for example close to the door. € The installation strength will depend on the vehicle model and the installation position. Choose a position where the main unit can be firmly installed, and install it securely. If the main unit is not securely fastened, the errors in location display will be greater. [. . . ] € When disposing of used batteries, please comply with governmental regulations or environmental public institutional rules that apply in your country/area. FRANÇAIS ITALIANO Remote controller handling notes • Always keep the remote controller protected from direct sunlight or high temperatures. Leaving the remote controller in places exposed to direct sunlight or high temperatures for long periods of time may cause deformation, discolouration or malfunction. € Replace the batteries when the remote controller’s performance deteriorates. [. . . ]