User manual PIONEER AVICC-C-X3-2

[. . . ] IMPORTANT INFORMATION ABOUT YOUR NEW NAVIGATION SYSTEM AND THIS MANUAL 3 IMPORTANT SAFEGUARDS PLEASE READ ALL OF THESE INSTRUCTIONS REGARDING YOUR NAVIGATION SYSTEM AND RETAIN THEM FOR FUTURE REFERENCE 4 Connecting the System Precautions before connecting the system 5 Before installing this product 5 To prevent damage 6 Parts supplied 7 Connecting the system 8 Connecting the power cord (1) 10 Connecting the power cord (2) 12 When connecting to separately sold power amp 14 When connecting a rear view camera 16 When connecting the external video component 17 ­ When using the AV-1 Input 17 ­ When using the AV-2 Input 17 When connecting the external unit featuring video source 18 When connecting the rear display 18 ­ When using a rear display connected to rear video output 18 Installation Precautions before installation 20 To guard against electromagnetic interference 20 Before installing 20 Installing this navigation system 21 ­ Installation notes 21 ­ Parts supplied 22 ­ Installing the hide-away unit 23 ­ DIN Front/Rear-mount 24 ­ DIN Front-mount 24 ­ DIN Rear-mount 25 ­ Fixing the front panel 25 Installing the GPS aerial 26 ­ Installation notes 26 ­ Parts supplied 26 ­ When installing the aerial inside the vehicle (on the rear shelf) 27 ­ When installing the aerial outside the vehicle (on the body) 28 After Installation After Installing this Navigation System 29 The navigation features of this product (and rear view camera option if purchased) are intended solely to aid you in the operation of your vehicle. It is not a substitute for your attentiveness, judgement and care when driving. Never use this navigation system to route to hospitals, police stations, or similar facilities in an emergency. Please call the appropriate emergency number. [. . . ] Always connect the vehicle's speed detection circuit or the ND-PG1 speed pulse generator, sold separately. Violet/White (REVERSEGEAR SIGNAL INPUT) This is connected so that the navigation system can detect whether the vehicle is moving forwards or backwards. Connect the violet/white lead to the lead whose voltage changes when the reverse gear is engaged. For more details about the wiring, refer to Connecting the power cord (2) Be sure to use only the supplied extension lead. Use of another lead could cause fire, smoke and/or damage this navigation system. It is necessary to set [Camera] in [System] to [On] when connecting the rear view camera. It is necessary to set [AV1 Input] in [System] to [Video] when connecting the external video component. It is necessary to set [AV2 Input] in [System] to [Video] when connecting the external video component. Be sure to use a CD-RM10 (sold separately) for wiring. If you use other cables, there is a case where wiring position differs, images and sounds may be disturbed. When connecting the external unit featuring video source NEVER install the rear display in a location that enables the driver to watch the video source while driving. It is necessary to set [AV1 Input] in [System] to [EXT] when connecting the external video component. This navigation system's rear video output is for connection of a display to enable passengers in the rear seats to watch the video source. The map screen navigation images output to the rear display differ from standard NTSC format images. Therefore, their quality will be inferior to the images that appear on the front display. To correctly output each type of video on the "Rear Display", we recommend using a "Rear Display" with a function to automatically switch the colour system (e. Pioneer does not recommend that you install or service your navigation system yourself. Installing or servicing the product may expose you to risk of electric shock or other hazards. Certain government laws may prohibit or restrict the placement and use of this system in your vehicle. Please comply with all applicable laws and regulations regarding the use, installation and operation of your navigation system. Do not install the display unit or the hideaway unit where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including airbags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. Install the display unit between the driver's seat and front passenger seat so that it will not be hit by the driver or passenger if the vehicle stops quickly. [. . . ] If it is left on the outside it may be knocked off and scratch the vehicle body. Do not paint the GPS aerial, as this may affect its performance. The aerial should be installed on a level surface where radio waves will be blocked as little as possible. Radio waves cannot be received by the aerial if reception from the satellite is blocked. [. . . ]