User manual PIONEER AVX-7600

[. . . ] It is extremely dangerous to allow the display lead to become wound around the steering column or gearshift. Be sure to install the display in such a way that it will not obstruct driving. Make sure that wires will not interfere with moving parts of the vehicle, such as the gearshift, parking brake or seat sliding mechanism. [. . . ] If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours. Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied manuals of both products and connect cords that have the same function. Yellow To terminal always supplied with power regardless of ignition switch position. Violet/white See the section "When connecting with a rear view camera" Audio output (AUDIO OUTPUT) This lead must be connected to the power supply side of the parking brake switch. When connecting with a Pioneer head unit CD-TS37GP) (sold separately) 15 cm Blue Guide speaker output (GUIDE SP OUTPUT) If you use this unit with a navigation unit (e. AVIC-900DVD), be sure to connect a guide speaker to this unit's guide speaker output terminal. This product Yellow 26 pin cable Navigation unit (e. When connecting with a car stereo with RCA audio input CD-TS37GP) (sold separately) 15 cm Guide speaker output (GUIDE SP OUTPUT) If you use this unit with a navigation unit (e. AVIC-900DVD), be sure to connect a guide speaker to this unit's guide speaker output terminal. When connecting with a car stereo with FM reception capability, use a FM modulator (e. When connecting with a DVD player When connecting with a rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera when the gear shift is moved to REVERSE (R) position is possible. The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight parking spot. Do not use this function for entertainment purposes. The object in rear view may appear closer or more distant than in reality. [. . . ] After installing the unit into the dashboard, reattach the frame. Installation using the screw holes on the side of the unit Fastening the unit to the factory radio mounting bracket. Select a position where the screw holes of the bracket and the screw holes of this product become aligned (are fitted), and tighten the screws at 2 places on each side. [. . . ]