User manual PIONEER BDP-LX54

[. . . ] Operating Instructions BDP-LX54 Blu-ray 3DTM PLAYER BDP-430 OPERATING INSTRUCTIONS Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. DEAR Pioneer CUSTOMER This product is for general household purposes. Any failure due to use for other than household purposes (such as long-term use for business purposes in a restaurant or use in a car or ship) and which requires repair will be charged for even during the warranty period. [. . . ] · When USB Wireless LAN Adaptors are connected to both the USB ports on the player's front and rear panels, the USB Wireless LAN Adaptor last connected is used. · Check the following information about the wireless LAN access point beforehand: - Type of encryption and encryption key - SSID (network name) · For manually performing the setting, the following information of the connected router or modem is required. Confirm the information prior to the setting. - IP address, netmask, gateway, DNS IP address · This player cannot be connected to a network when a proxy server is used. Selecting the connection method 1 2 3 4 5 Press HOME MENU to display the HOME MENU screen. Press to select "Settings", then press ENTER. Press to select "Communication Setup", then press ENTER. Press to select "Cable/Wireless Select", then press ENTER. Press to select the connection type, then press ENTER. · Cable: Select this to connect to the network using a LAN cable. · Wireless: Select this to connect to the network using a USB Wireless LAN Adaptor. 9 10 Press ENTER to test the connection. For setting the IP address, press to select "Yes" or "No", then press ENTER. Do you obtain the IP address automatically? Yes No IP Address Netmask Gateway Next Changing the communications settings 1 2 3 4 Press HOME MENU to display the HOME MENU screen. Press to select "Settings", then press ENTER. Press to select "Communication Setup", then press ENTER. Press to select the connection method you want to set, then press ENTER. · Ethernet Setup(Cable): Change the settings for connecting to the network using a LAN cable. · Ethernet Setup(Wireless): Change the settings for connecting to the network using a USB Wireless LAN Adaptor. · If selecting "Yes": The IP address is automatically obtained. · If selecting "No": The IP address, netmask, gateway and primary and secondary DNS IP addresses are manually entered using the screen for inputting characters. (Page 23) 11 12 Press to select "Next", then press ENTER. For testing the connection to the internet, after confirming the settings, press to select "Test", then press ENTER. · "Test" is available only when setting to obtain the IP address automatically. "Test" cannot be selected if the IP address has not been obtained automatically. Confirm the current setting. IP Address : xxx xxx xxx xxx : xxx xxx xxx xxx Netmask : xxx xxx xxx xxx Gateway DNS Address : xxx xxx xxx xxx MAC Address : xx:xx:xx:xx:xx:xx Test Complete 5 Press to select "Change", then press ENTER. Current Ethernet setup info. IP Address : Auto Setup Netmask : Auto Setup Gateway : Auto Setup DNS : Auto Setup Change Initialize · As a result of the test, if the internet connection fails, enter the setup values manually. 13 Press to select "Complete", then press ENTER. · For initializing the current setting, select "Initialize", then press ENTER. · When "Ethernet Setup(Cable)" was selected at step 4, proceed to step 10. 6 7 Press to select the access point, then press ENTER. Press to set the type of encryption, then press ENTER. · When "OPEN" is selected, proceed to step 9. [. . . ] Region code Letter Box (LB 4:3) (page 20) A screen size with black bars on the top and bottom of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV. Subtitles (pages 18, 19) These are the lines of text appearing at the bottom of the screen which translate or transcribe the dialog. They are recorded on many DVD and BD video discs. Linear PCM Sound Linear PCM is a signal recording format used for Audio CDs and on some DVD and Blu-ray discs. The sound on Audio CDs is recorded at 44. 1 kHz with 16 bits. (Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD video discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD video discs. ) Input/Output HDMI OUT COMPONENT VIDEO OUTPUT HDMI 19-pin standard connector (5 V, 250 mA) Output level: Y: 1 Vp-p (75 ohms) PB, PR: 0. 7 Vp-p (75 ohms) Jacks: RCA jack Output level: 1 Vp-p (75 ohms) Jack: RCA jack Terminal: Square Optical terminal Output level: 2 V rms (Output impedance: 1 k ohms) Jacks: RCA jack Two sets (1 front, 1 rear), USB 2. 0 High Speed (480 Mbit/s) correspondence 10BASE-T/100BASE-TX Time number This indicates the play time which has elapsed from the start of a disc or a title. [. . . ]