User manual PIONEER CD-1000

[. . . ] In the event that the software fails to function according to the instruction manual, etc. , within 30 days from the date of delivery even when properly installed and used, the Company will repair such defective software or replace it with another software free from defects and take appropriate measures based on the judgment of the Company. Above-mentioned measures will constitute the entire warranty to you by the Company pertaining to the software, and the Company will not be held responsible for any and all warranty including legal liability for the warranty of latent defects. Furthermore, the Company will not guarantee any merchantability of the software nor its fitness for a particular purpose. Notwithstanding the provision set forth in Item 1 above, the Company will not be held responsible, if the use by installing other application software results in the defect of the software. [. . . ] (With the horizontal length as the base, the vertical length is adjusted to the shape of the display elements of the front panel. ) · By setting different sizes for the start point and end point, animation with zooming and telephoto effects can be created. z Set the images to capture using the following procedure. 1. Set the frame numbers. 14 x Click "Capture" to capture the images. Captured images will be displayed in the preview. Note: · Capture images can be checked in the preview. Use the Playback (3), Pause (8), Stop (7) and Repeat ( ) buttons to control the playback of the captured images. · Captured images can be processed (converted or corrected). (Images are saved using a file format that cannot be processed. Always process images before saving. ) Creating a Wipe Display Animation Select "Wipe" using steps z ­ c of "Selecting the Animation to Create". The selected image will be automatically set as the "Foreground". To select the background image, click "Display Background" and select the image file. q Frame: Image position for both foreground and background can be set. (See "Changing the Frame Position and Size" on page 11. ) w Foreground/Background Select Button: The image displayed in the main view can be switched between the foreground (the image displayed first) and background (the later displayed image). e Direction Setting button: The direction to wipe (repaint) can be set. Halftone: Although images will not appear as jagged as with dithering, it is not suitable for images with gradations. 17 Setting the Image Conversion Method in Detail Images can be converted as desired using RGB balance adjustment and 4-step threshold adjustment. z Click "Dithering". The Dithering screen will appear. x Click "OFF". c Click "Details". The Image Conversion Detailed Settings screen will appear. v Set the conversion method in detail. q RGB balance adjustment: The balance of R (red), G (green) and B (blue) are adjusted to enhance colors that became hard to see during image conversion. w 4-step threshold: The range of each step during 4-step conversion can be set using threshold values. Conversion can be made by widening the range of steps to enhance from the original image. e OK: Confirms the adjustment contents and closes the Image Conversion Detailed Settings screen. r Cancel: Cancels the adjustment contents and closes the Image Conversion Detailed Settings screen. t Default: Returns the adjustment contents to the default settings. y Output Image: Displays the output image of after the adjustment. b When completed with settings, click "OK". The setting contents will be reflected on the image and the Image Conversion Detailed Setting screen will be closed. 18 Adjusting the Image The contrast and brightness of the captured images can be adjusted or effects such as negative and positive conversions can be applied. Note: · Images that have already been saved as files cannot be adjusted. z Click "Effect". The Effects screen will appear. x Adjust the effects. q Contrast Adjustment: The contrast of the image can be adjusted. The contrast level is adjusted by moving the slider. w Brightness Adjustment: The brightness of the image (overall brightness) can be adjusted. [. . . ] (See page 25. ) Quit the program and restart. Creating animations Symptom A black screen is displayed when creating wipe display animation. Not selecting a background image will cause a black screen to be selected. Editing movies Symptom Cannot open reference files. Remedy Select a movie file with file format of "LKD (. lkd)". In addition, files displayed with "Locked" on the lower right of the dialog box cannot be opened as reference files. [. . . ]