User manual PIONEER CDJ-1000MKII

[. . . ] COMPACT DISC PLAYER CDJ-1000MK2 Operating Instructions NOTE: THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BOTTOM. 2 <DRB1339> En [For U. S. model] IMPORTANT NOTICE H006AEn The serial number for this equipment is located in the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. This is for your security. WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to lead, a chemical known to the State of California and other governmental entities to cause cancer and birth defects or other reproductive harm. [. . . ] ÷ Raise the TRIM, CHANNEL FADER, and MASTER LEVEL settings appropriately so that sound is produced from CD1. 2. Press the PLAY/PAUSE button (3/8). ¶ Playback will begin immediately from the specified Cue point. Changing Playback Speed (*) Pull the Tempo Control knob towards you. Slide the knob towards you (+) to increase the tempo and slide it away from you (­) to decrease it. ¶ The rate of change in playback speed (tempo) is shown in the display. ¶ The playback speed can be changed without changing the pitch ( "Applying Master Tempo"). 1. Set the DJ Mixer's CROSS FADER slider at its left side (CH 1). ÷ Track A is heard from speakers. 7 Selecting range of tempo adjustment Press the TEMPO ±6/±10/±16/±100 WIDE button. Each time the button is pressed the variable range of the Tempo Control knob changes as follows: ±6%, ±10%, ±16% and ±100%. You can adjust as follows: at ±6% :0. 02%units, at ±10%:0. 05%units, at ±16% :0. 05%units, at ±100%:0. 5%units. ¶ The set variable range value is indicated in the display. (When ±100% is selected, the WIDE indicator appears in the display. ) 2. Press the TRACK SEARCH buttons (4, ¢) on player CD2 to find and select track B. Set the DJ Mixer's MONITOR SELECTOR button CH 2 to ON. Rotate the DJ Mixer's MONITOR LEVEL so that track B can be heard from the headphones. ÷ Only track A is heard from the main speakers. 6. Set cueing for track B on the headphones. 1 With player CD2 in the playback mode, press the PLAY/PAUSE button (6) to hear the point you wish to cue. ÷ When the JOG MODE is set to CDJ, the unit will enter audible pause mode (sound can be heard); when set to VINYL, the unit will enter inaudible pause mode (no sound can be heard). 2 Rotate player CD2's Jog dial and search for the track's Cue point (first beat). 3 When you have settled on the Cue point, press the CUE button on player CD2. ÷ The player's sound will be muted and cueing will be completed. 7 Resetting tempo Press the TEMPO RESET button. The Tempo Reset indicator lights and the rate of tempo variation is reset to [0] (normal tempo) regardless of Tempo Control knob setting. ¶ One more press of the TEMPO RESET button cancels the reset and speed setting made with the Tempo Control knob is valid again. Applying Master Tempo (*) Press the MASTER TEMPO button during playback. The MASTER TEMPO button and the [MT] indicator light. The speed (tempo) can now be changed using the Tempo Control knob but the pitch (key) does not change. [. . . ] General System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Compact disc digital audio system Power requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 W Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]