User manual PIONEER CDJ-2000NXS

[. . . ] MULTI PLAYER CDJ-2000NXS CDJ-2000nexus http://pioneerdj. com/support/ The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. http://rekordbox. com/ For inquiries on rekordbox™, please see the support site indicated above. Operating Instructions Contents How to read this manual In this manual, names of screens and menus displayed on the computer screen, as well as names of buttons and terminals on the product, etc. , are indicated within brackets. Examples: — Press the [CUE] button. — The [UTILITY] screen is displayed. — Click on the Windows [Start] menu button, then [All Programs] > [Pioneer] > [rekordbox 2. x. x] > [rekordbox 2. x. x]. [. . . ] The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator lights. ! When a new cue point is set, the previously set cue point is canceled. 1 During playback, press the [IN/4BEAT (IN ADJUST)] button at the point at which you want to start loop playback (the loop in point). Loop In Point is set. ! This operation is not necessary if you want to set the currently set cue point as the loop in point. Adjusting the cue point position 1 Press the [SEARCH m, n] buttons while pausing at the cue point. The [PLAY/PAUSEf] and [CUE] indicators flash. 2 Press the [LOOP OUT (OUT ADJUST)] button at the point at which you want to end loop playback (the loop out point). The loop out point is set, and loop playback begins. 2 Press one of the [SEARCH m, n] buttons. The cue point can be fine-adjusted in steps of 0. 5 frames. ! The same operation is possible using the jog dial. 3 Press the [CUE] button. The position at which the button was pressed is set as the new cue point. ! When a new cue point is set, the previously set cue point is canceled. Fine-adjusting the loop in point (loop in adjust) 1 During loop playback, press the [IN/4BEAT (IN ADJUST)] button. The [IN/4BEAT (IN ADJUST)] button starts flashing rapidly, and the [LOOP OUT (OUT ADJUST)] button turns off. The loop in point’s time is displayed on the main unit display. Returning to Cue Point (Back Cue) During playback, press the [CUE] button. The set immediately returns to the currently set cue point and pauses. ! When the [PLAY/PAUSE f] button is pressed, playback starts from the cue point. 2 Press one of the [SEARCH m, n] buttons. The loop in point can be adjusted in units of 0. 5 frames. ! The same operation is possible using the jog dial. ! The loop in point’s range of adjustment is ± 30 frames. ! The loop in point cannot be set at a point beyond the loop out point. Checking Cue Point (Cue Point Sampler) Keep pressing the [CUE] button after returning to the cue point. Playback starts from the set cue point. Playback continues while the [CUE] button is pressed. ! If the [PLAY/PAUSE f] button is pressed while sampling the cue, playback continues even if the [CUE] button is released. 3 Press the [IN/4BEAT (IN ADJUST)] button. Loop playback resumes. ! Normal loop playback also resumes if no operation is performed for over 10 seconds. Fine-adjusting the loop out point (loop out adjust) 1 During loop playback, press the [LOOP OUT (OUT ADJUST)] button. The [LOOP OUT (OUT ADJUST)] button starts flashing rapidly, and the [IN/4BEAT (IN ADJUST)] button turns off. The loop out point’s time is displayed on the main unit display. Setting Cue Point during playback (Real Time Cue) During playback, press the [IN/4BEAT (IN ADJUST)] button at the point at which you want to set the cue point. The point at which the button was pressed is set as the cue point. 2 Press one of the [SEARCH m, n] buttons. The loop out point can be adjusted in units of 0. 5 frames. ! The same operation is possible using the jog dial. ! The loop out point cannot be set at a point before the loop in point. 3 Press the [LOOP OUT (OUT ADJUST)] button. Setting auto cue When a track is loaded or the track search operation is performed, the silent section at the beginning of the track is skipped and the cue point is automatically set at the point immediately before the sound starts. Loop playback resumes. ! Normal loop playback also resumes if no operation is performed for over 10 seconds. Press the [TIME MODE/AUTO CUE] button for over 1 second. [A. ! When [TIME MODE (AUTO CUE)] is pressed again for at least 1 second, auto cue is set to off. Canceling Loop playback (Loop Exit) During loop playback, press the [RELOOP/EXIT] button. Playback continues beyond the Loop Out Point without returning to the Loop In Point. 26 En Returning to Loop playback (Reloop) After canceling loop playback, press the [RELOOP/EXIT] button during playback. Playback returns to the previously set Loop In Point, and Loop playback resumes. Using active loops 1 Connect a storage device (SD, USB) to this unit. 2 Load a track for which an active loop has been set with rekordbox. One loop stored in rekordbox can be set as the active loop. The set active loop points are indicated on the waveform display as shown below. Setting loops automatically (4-beat Loop) During playback, press the [IN/4BEAT (IN ADJUST)] button for over 1 second. A loop of 4 beats starting from the point at which the button was pressed is set automatically according to the BPM of the currently playing track, and loop playback starts. ! If the track’s BPM cannot be detected, the BPM is set to 130. When the set point is reached, the loop is set automatically and loop playback begins. Advanced Operation Cutting loops (Loop Cut) During loop playback, press the [CUE/LOOPCALLc (LOOP 1/2X)] button. The loop playing time is cut in half each time the button is pressed. Emergency loops With this unit, a 4-beat loop is set automatically to prevent the sound from being interrupted if a track can no longer continue to play. ! DJ playback is restricted during emergency looping. [. . . ] 5 % to 85 % (no condensation) Analog audio output (AUDIO OUT L/R) Output terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal Digital audio output (DIGITAL OUT) Output terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA terminal Output type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coaxial digital (S/PDIF) USB downstream section (USB) Port. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Type A Power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]