User manual PIONEER CDJ-800MK2

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory K015 En drawings. [. . . ] ¶ Even if the EJECT button is pressed by mistake, if the PLAY/PAUSE button is pressed quickly (before the [EJECT] indicator lights in the display), the unit will revert to the status it was in before the EJECT button was pressed. However, the audio output will stop during that time. ¶ Following disc eject, if the same disc is reinserted, the unit will return to the same status it was in before the disc was ejected (with exception of loop). ¶ If the PLAY/PAUSE button is pressed again, the button's indicator will light and playback will resume. ¶ In CDJ mode, broken playback sound will be output even during pause. If you wish for no sound to be output, lower the output level of the audio mixer. ¶ In VINYL mode, playback may decelerate slowly before coming to a full stop ( P. ¶ If the [END] display is left on for 100 minutes without further player operations, the unit will stop, even if it is in the play mode. ¶ When playing MP3, fast forward/fast reverse are supported only for tracks inside the same folder. ¶ When playing MP3 files recorded in VBR format, fast forward and fast reverse speed will be slower. ¶ Hold down one of the SEARCH buttons (1, ¡) while turning the jog dial in the desired direction to enter super-fast forward or superfast reverse mode. ¶ When playing MP3 files recorded in VBR format, super-fast search is not supported; fast forward and fast reverse are performed at ordinary speed. ¶ During super-fast search, the search direction is determined by the direction the jog dial is turned. the direction of the pressed SEARCH button (1 , ¡) is ignored. ¶ When the jog dial rotation stops, the unit returns to playback mode. ⶠWhen the SEARCH button (1 , ¡) is released , super-fast search is canceled. ¶ In the case of CDs, fast forward and reverse are performed in proportion to speed at which the jog dial is rotated. ¶ When playing MP3, fast forward/fast reverse is supported only tracks inside the same folder. ¶ Each time the button is pressed, the track search is performed in the direction corresponding to the arrow on the button (during playback of a track, to return to the beginning of the preceding track, press the 4 button twice). During playback of MP3s, the first track found in the direction pressed will be searched, and only those tracks inside the same folder are searched. If folder search is not performed when a CD-ROM is inserted, the tracks in the root directory only are searched. In cases in which there are no tracks in the root directory, playback will start from the track with the lowest number in the folder. [. . . ] ¶ After the disc's final track finishes playing, if the [END] display continues for 100 minutes without any further operation input, disc rotation will automatically stop. With certain discs, loud noise is produced or play stops. When the auto cue function is set ON, track search is not finished. Back cue function cannot be carried out even though the CUE button is pressed in playback mode. [. . . ]