User manual PIONEER CDX-P25

[. . . ] When driving on an uneven road, the player may not reproduce every sound properly. During winter the inside of the vehicle may be very cold. If the heater is turned on and the player is used soon after, the disc or optical parts (prism, lens, etc. ) may become misted up, and the player will not operate correctly. [. . . ] Hold down the magazine lock button and pull the tray out. If you need more magazines, please ask your nearest dealer for magazine JD-612V. Seal After removing the transport screws, cover the hole with the supplied seal. Align the disc tray with the left and right grooves, and push it in until you hear it click. Transport screw Attach to the original position before transporting the set. Be sure to remove the disc before changing a disc tray. If the tray is not aligned with the right and left grooves, it cannot be pushed to the end. If you load a disc with the label generally printed in black facing down, not only will the player not be able to recognize whether the disc is set or not, but also, if you have a multi-CD controller, the controller will not display an error message to let you know about it. So make sure all the discs in each magazine have their label sides facing up. Do not put your fingers in the magazine tray as this may lead to incorrect operation and damage to the player. If the label on the magazine is coming off or wrinkled up, it may damage the eject mechanism, and in some cases, the magazine may not be ejected. Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. Even if the power is cut off because the power cord is removed or the battery is replaced, the CD title display and ITS memory are retained for 24 hours. If the power does not switch on or if the compact disc player does not operate when the button on the multi-CD controller is pressed, or if the multi-CD controller display is incorrect, press this button on the player with the tip of a pencil to restore normal operation. (This button is located inside the door. ) Always press the clear button on the multi-CD controller, too, after pressing this button. If the clear button is pressed when the player contains a magazine or the ignition switch is set to the ON or ACC position, the CD title display and ITS memory are cleared. Specifications and design are subject to possible modification without prior notice due to improvements. Yellow To the terminal always supplied with power regardless of ignition switch position. Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. Mounting the player on the mounting board with self-tapping screws/ Installazione dell'apparecchio sul pannello di montaggio con viti autofilettanti/ Fixation du lecteur sur une platine à I'aide de vis autotaraudeuses Mounting parts/Pezzi per l'installazione/Pièces de fixation Refer to the following illustrations of mounting parts when mounting the player. [. . . ] Do not mount the player on the spare tire board or any other unstable place. Mount the player in a place where it does not prevent the spare tire, jack, or tools from being easily removed. Do not mount the player in areas of direct sunlight and so becomes hot, like on the dashboard or the rear shelf. Use any angle in this range (up to 90 degrees). [. . . ]