User manual PIONEER CMX-3000 annexe 1

[. . . ] COMPACT DISC PLAYER CMX-3000 Operating Instructions Read before use Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] Press the forward or reverse SEARCH button (1, ¡). ¶ The cueing point will be shifted forward or backward in 1-frame units. ¶ The cueing point may also be shifted forward or backward by pressing the forward or reverse SEARCH button (1, ¡) and then turning the jog dial. ¶ The point where the CUE button is pressed will become the new cueing point. 7 Super-fast searching Turn the jog dial while pressing either SEARCH button (1, ¡). ¶ Turning the jog dial in the direction you wish to search while pressing the forward or reverse SEARCH button (1, ¡) will cause the player to enter high-speed fastforward or high-speed reverse mode. ¶ CD will be searched in the same direction as that in which the jog dial is rotated. The direction indicated by the SEARCH button actually pressed will be ignored. ¶ Playback will resume when the jog dial is no longer being turned. ¶ Releasing the SEARCH button causes the player to leave high-speed search mode. Changing Playback Speed (*) Pull the tempo control slide towards you. Slide the knob towards you (+) to increase the tempo and slide it away from you (­) to decrease it. ¶ The rate of change in playback speed (tempo) is shown in the display. ¶ The playback speed can be changed without changing the pitch ( "Setting a Master Tempo"). Cueing Point Settings (*) Once a cueing point has been stored in memory, it can be used to place the player in a state where it is ready to begin playback from the cueing point by pressing the CUE button. 7 Manual cueing 1. During playback, press the PLAY/PAUSE button (38) to pause playback at the point from which you wish to begin playback. Search for the precise position of the cueing point. 7 Using frame numbers to specify cueing points Cueing points may be specified in 1-frame units (where 75 frames are equivalent to 1 second). Use the jog dial or the forward or reverse SEARCH button (1, ¡) to advance to the desired frame. Rotating the jog dial once causes the player to advance or rewind 75 frames in the specified direction. Similarly, pressing the forward or reverse SEARCH button causes the player to advance or rewind 1 frame in the specified direction. 7 Listen to the sound at the current frame to determine the cueing point Turn the jog dial slowly and then return it to just before the point from which you wish to begin playback. (The cueing point thus defined will consist of that point directly after the sound which can be heard during a cueing pause. ) 7 Selecting the tempo adjust range Press the TEMPO RANGE button. Each time the button is pressed, the range of adjustment possible with the tempo control slide changes (±6%, ±10%, ±16%, WIDE). At ±6%, the adjustment unit is 0. 05%, at ±10% and ±16%, the adjustment unit is 0. 1%. [. . . ] If any such problem occurs, turn off the power to the CMX-3000, wait for the currently inserted disc to come to a full stop, and then turn on the power again to see if that fixes the problem in question. ÷ The CMX-3000 cannot be used to replay partially-written CD-R or CD-RW discs. ÷ The CMX-3000 cannot be used to replay non-standard-shaped discs or any discs other than 5 inch/12 cm discs or 3 inch/8 cm discs which have been inserted into an 3 inch/8 cm disc adapter. (Note that attempting to replay such discs may result in damage or breakdown. ) ÷ The BPM value measured by the CMX-3000 may differ from the BPM value recorded on a CD or from our DJ mixer, but this difference is a result of differences in the BPM value measurement method; not a result of a fault with the player. Error Message Display When the CMX-3000 CD player is unable to operate properly, an error code is displayed on the display panel. [. . . ]