User manual PIONEER CNDV-1100HD

[. . . ] Precaution Precaution Licence agreement Upgrade Instructions and Operation Manual Addendum 2012 HDD NAVIGATION UPGRADE DISC CNDV-1100HD This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes. !Read the entire manual before upgrading the programme of your navigation system. The screens shown in the examples may differ from the actual screens. [. . . ] You can perform simplified operations by using the TRK (c/d) button and VOL (b/a) button. (We recommend changing the AV source to “AM” or “FM” before you start the update. ) !The update takes approximately one hour in total. If you turn the ignition switch off (the navigation system turns off) or eject the upgrade disc, the update resumes when the navigation system turns on or the disc is reinserted. 2 Press the MAP button to display the current location. CAUTION For users who use AVIC-HD3 II or use the hardware upgraded by CNDV-800HD, updating another software programme will begin first. While this screen is visible, NEVER switch the ignition key position or turn off the power of navigation system. Renewal data The following data are updated: !Gracenote® Database Others, 0-9: Touch to toggle the selection. Either lowercase or uppercase letters can be selected. Touch to toggle the selection. After the installation is complete, the navigation system restarts. Check the details of the caution message and touch [OK]. p The users who use other models can skip this caution and proceed to the next step. The message “Password obtained from Pioneer should be entered to update. Please press “Cancel” to stop update. ” appears. Alternative options: No: Shows the device number (Device#) of your navigation system. 6 Enter the password for authentication that you obtained, then touch [OK]. When the installation of “Disc 1” is finished, the message that “Disc 2” is required appears. After replacing the disc, the installation proceeds. When the update of map database is completed, the finished message appears. 8 Touch [OK] to restart the system. Checking whether the upgrade was done properly Display “Service Information” screen to compare the current version number with the previous one. = For details of the operation, refer to Checking the device number. POI data coverage Approximately 5. 7 million POIs are included in the database. p For the modified categories that can be used on “Overlay POI”, “Vicinity Search” and used on the voice recognition, refer to Category list for vicinity search (Renewal). p Some POI information may not be accurate or may become inaccurate through the passage of time. Please directly contact the POI to verify the accuracy of the information about the POI which appears in this database. POI information is subject to change without notice. Time restrictions This is a new feature. [. . . ] The voice operations related the telephone are available only using hands-free phoning feature of this system and is unavailable during a call. For <Registered phone book’s pronunciation> shown above, say the registered pronunciation. For example, if the registered pronunciation in the entry of phone book is “My friend” and you want to operate “Telephone Book”, say “My friend”. Making phone call to your home Call* d Call Home d Touch VOICE icon to call your home (Only when the phone number is registered in your home. ) Search by city centre Destination* d POI d <City Centre> d Location Screen (A) Notes: ! [. . . ]