User manual PIONEER CNSD-250FM ADDENDUM

[. . . ] Upgrade Instructions and Operation Manual Addendum 2010 AVIC F-series Mapping upgrade CNSD-250FM 2010 AVIC Mapping upgrade CNSD-200FM This software upgrade will result in changes to certain features and availability of information. While the changes are intended to improve the overall user experience for most users, Pioneer and its licensors disclaim any warranty or liability for damages in connection with such changes. English Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Preparation for upgrade 16 ­ Checking the device number 16 ­ Checking the current version 16 ­ Getting the password for authentication 17 Upgrade procedures 17 ­ Upgrading the software programme and the map database 17 ­ Checking whether the upgrade was done properly 18 ­ Updating the Bluetooth wireless technology software 19 Changes on the upgraded programme Navigation functions 20 ­ Signpost and recommended lane 20 ­ Switching the map mode 20 ­ Hiding controls for tilt and rotation angle 21 ­ Searching for POIs around the address 21 AV functions 22 ­ Selecting a track from the list 22 Settings Menu 22 ­ Textured Polygons 22 ­ POI Settings 22 ­ Displayed Info 23 ­ Manage Track Logs 23 ­ Changes of default value 24 Restore Factory Settings 24 ­ Setting items to be deleted 25 Troubleshooting Problems in the procedures for updating 27 Messages in the procedures for updating 27 Important !The screens shown in the examples may differ from actual screens. Actual screens may be changed without notice for performance and function improvements. [. . . ] For details about the map coverage of this navigation system, refer to the information on our website. It is strictly prohibited to reproduce and use any part or the whole of this map in any form without permission from the copyright owner. If the local traffic regulations or conditions deviate from this data, follow the local traffic regulations (such as signs, indications, etc. ) and conditions (such as construction, weather, etc. ). The traffic regulation data used in the map database applies only to standard sized passenger vehicles. Note that regulations for larger vehicles, motorbikes, and other non-standard vehicles are not included in the database. 03 About the database Copyright technology was used in developing this product Sensis & Whereis ® and TM registered trademark and trademark of Telstra Corporation Limited (ABN 33 051 775 556). Powered by NNG Engb 15 Chapter 04 Instructions for upgrading The navigation system upgrade process 1 Check the device number of your navigation system. = For details of the operation, refer to Checking the device number on this page. Preparation for upgrade Checking the device number First, check your device number (DEVICE NUMBER, displayed such as Device Number or Device#) of your navigation system for later procedures. To display the device number, do the following. 1 Park your vehicle in a safe place and apply the handbrake. 2 Insert the upgrade SD memory card into the SD card slot. 3 Turn the ignition switch OFF and back ON to reboot the navigation system. After a short pause, the device number will appear. 4 Write down your device number (Device#) onto the supplied Media Number Card (MEDIA NUMBER CARD) to avoid mistakes. 6 Turn off the vehicle engine to terminate the system. The navigation system is also turned off. 7 Eject the upgrade SD memory card. 2 Check the version information. = For details, refer to Checking the current version on this page. j 3 Get the password for authentication. = For details, refer to Getting the password for authentication on the next page. j 4 Upgrade the software programme of your navigation system. = For details of the operation, refer to Upgrading the software programme and the map database on the next page. j 5 Check whether the upgrade was done properly. = For details, refer to Checking whether the upgrade was done properly on page 18. j Checking the current version You may need the version information to confirm completion of upgrade. Check the version information using the following procedure. 1 Press the MENU button to display the "Top Menu", and then touch [Settings]. [. . . ] 2 Touch [Restore Factory Settings] or [Delete user information]. p Because deleted data cannot be restored, take extra care not to mistakenly delete items. 3 Touch [OK]. The navigation system will now restart. 24 Engb Chapter Changes on the upgraded programme Setting items to be deleted The items to be deleted vary depending on the reset method. The items listed in the following table return to the default or factory settings. Almost all items not listed below will be retained. [. . . ]