User manual PIONEER CS-R300 service manual

[. . . ] -- USB MSC (Mass Storage Class) compliant portable audio player and memory -- WMA, MP3, AAC and WAV file playback For details about the compatibility, refer to USB audio player/USB memory compatibility on page 48. This unit can control the following iPod models. This unit can control previous generations iPod models with a Pioneer iPod adapter (e. In this case, most functions are essentially the same as an iPod connected to USB interface of this unit. [. . . ] You can only operate this function when Bluetooth adapter (e. # To turn the BT AUDIO source off, press MULTI-CONTROL again. The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. # To turn the feature demo off, press MULTI-CONTROL again. Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power. You can also turn on or off feature demo by pressing DISP while this unit is turned off. To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function. You can only operate this function when Bluetooth adapter (e. With some Bluetooth audio players, you may be required to enter the Bluetooth audio player PIN code in advance to set this unit for a connection. 4 Press MULTI-CONTROL to move the cursor to the next position. % Push and hold MULTI-CONTROL left or right for about one second and release. Using the functions allocated to 1 to 6 keys You can use this unit to control an interface adapter for iPod, which is sold separately. % Fast forward or reverse Push and hold MULTI-CONTROL left or right for about one second and release. % Select a track Push MULTI-CONTROL left or right. While iPod is connected to this unit, PIONEER (or (check mark)) is displayed on the iPod. When the ignition switch is set to ACC or ON, the iPod's battery is charged while the iPod is connected to this unit. While the iPod is connected to this unit, the iPod cannot be turned on or off. Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod. The iPod is turned off about two minutes after the ignition switch is set to OFF. Note If a playlist is selected, first, this unit shows the playlist of your iPod's name. If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. [. . . ] For USB portable audio players, the sequence is different from that of USB memory and depends on the player. The user cannot assign folder numbers and specify the playback sequence with this unit. However, depending on the system environment, you cannot specify the file playback sequence. Connect directly the dock connector cable to the iPod so that this unit works properly. [. . . ]