User manual PIONEER CSV100-K

[. . . ] Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) If the AC plug of this unit does not match the AC outlet you want to use, the plug must be removed and appropriate one fitted. Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. if connected to an AC outlet , the cut-off plug can cause severe electrical shock. Make sure it is properly disposed of after removal. [. . . ] try the following: · Switch the player off, then on again. Reconnecting the USB device with the player switched off. Selecting to another input source (like DVD/CD), then back to USB. Using a dedicated AC adapter (supplied with the device) for USB power. If this doesn't remedy the problem, it is likely your USB device is incompatible. The tracks of a music CD loaded in this unit can be recorded on a USB connected to the USB port. Make sure USB DATA is showing in the front panel display (or the system is in standby) when disconnecting. It is not possible to connect this unit to a personal computer for USB playback. Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss of data that may occur when connected to this unit. With large amounts of data, it may take longer for the system to read the contents of a USB device. Some USB devices may not be properly recognized. When TESTTONE is selected, the test tone automatically moves from speaker to speaker in the order listed above. You should hear the test tone at the same volume from each speaker when seated in the main listening position. Since the subwoofer produces ultra-low frequencies it may seem quieter than it actually is. When the speaker volume is set to 51 or more, TESTTONE cannot be selected and the channel level setting range is restricted. In addition, if the channel level range of any speaker is set to the + side, the maximum speaker volume is also restricted. OFF (default) ­ No dynamic range adjustment (use when listening at higher volumes) · mID ­ Mid setting · HIGH ­ Dynamic range is reduced (loud sounds are reduced in volume while quieter sounds are increased) With the uniquely shaped high-quality speakers supplied with this unit, the Effective Sound mode enables the following Pioneer exclusive audio technologies designed to maximize the real experience of sound originally inherent in movies and music. Turn on the Effective Sound mode under normal circumstances to maximize the capabilities of this unit. 2 · Dynamic Range Compression Resuscitates detailed sound susceptible to ambient noise to create an acoustic environment where you feel as if you are right in the action. Frequency Characteristic Correction Realizes the playback characteristic optimized for long hours of listening in addition to the added features of the supplied speaker units. If you play a DTS-encoded CD, you will need to change this setting to hear the decoded signal. DTS-CD ­ Proper decoding of DTSencoded CDs; the beginning of regular CD tracks may be skipped. [. . . ] An error occured during MCACC setup because the speakers are not connected or are not connected properly. An operation is prohibited because the sound is muted (press MUTE). Check whether the speaker cables are short-circuited. If the error message continues to be displayed, contact your Pioneer authorized service center or your dealer for servicing. [. . . ]