User manual PIONEER CT-200 service manual

[. . . ] These Operating Instructions describe the operating procedures of not only the XC-L77 Stereo CD Receiver but the CT-200 Stereo Cassette Deck as well. Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. [. . . ] If there's already a tape in the player, then pressing the TAPE button--even when the system is in standby mode-- will switch the system on, switch to TAPE sound, and start the tape playing. Note: Track search is unlikely to work reliably in the following cases: y if the space between tracks is less than about 4 seconds y if the recording is particularly noisy so the spaces are not recognized y if the recording contains frequent silences, such as a language study tape. Y if the recording contains sections of very quiet material, such as some classical music recordings For best sound quality, tapes that are recorded with Dolby NR should be played with Dolby NR switched on. This includes virtually all commercially produced tapes--look for the double­ D symbol (2) on the inlay card, or on the cassette tape itself. The Dolby NR indicator (2NR) lights in the display when Dolby NR is on. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. Pressing MENU displays the first menu option for the component you're currently using. You can display the next option by pressing >, or the previous one by pressing $. The menus 'wrap around', so once you get to the end of the list, pressing > again takes you back to the first item. to select the menu option currently displayed , press the SET button. This will take you to a further 'sub-menu', which may simply consist of two settings (like FM mono and auto, or Dolby NR on and off), or may have more choices. If you then press CANCEL, the total playing time of the playlist is displayed. If you want to delete the playlist without ejecting the disc, simply press CANCEL when the disc is stopped. You can set the CD player to repeat either a single track over and over, or the whole disc. Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. Three options are available: $ REPEAT TRK?Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. One-track repeat mode Mode de répétition d'une plage All-track repeat mode Mode de répétition de toutes les plages In one track repeat mode, any track you choose will repeat. If you jump to another track (using track skip or manual search), then the new track will start repeating. In all track repeat mode, whenever the end of the disc is reached, the player will jump back to the first track and continue playback. You're still free to skip tracks and use manual search. The repeat mode indicator stays lit during playback, too. [. . . ] NOTE Setting the tuner's frequency interval: FM broadcasts are normally tuned at 50kHz intervals and AM broadcasts at 9kHz intervals, but this setting can be changed to 100kHz (FM) and 10kHz (AM) if desired in the following way: 1. Switch between AM 9K (FM 50K) and AM 10K (FM 100K) using the $ and > buttons. To clean the compact disc player, wipe with a soft, dry cloth. For stubborn dirt, wet a soft cloth with a mild detergent solution made by diluting one part detergent to 5 or 6 parts water, wring well, then wipe off the dirt. [. . . ]