User manual PIONEER CT-F700

[. . . ] ­ Basic operations 17 ­ Selecting and playing files/tracks from the name list 18 ­ Browsing for a song on the iPod 18 ­ Function settings 18 Playing still images 20 ­ Basic operations 20 ­ Selecting and playing files from the name list 21 ­ Function settings 21 ­ Introduction of operations for playback of still images as a slideshow 22 Bluetooth Telephone 23 ­ Connection menu operation 23 ­ Phone menu operation 24 ­ Function and operation 25 Audio Adjustments 26 System settings 27 Entertainment settings 28 ­ Customizing the illumination color 29 Initial Settings 29 ­ Auto EQ (auto-equalizing) 30 Other functions 32 ­ Using an AUX source 32 ­ Switching the display indication 33 Detailed instructions Changing the wide screen mode 34 Setting the DivX subtitle file 34 Setting the aspect ratio 34 Displaying the DivXâ VOD registration code 34 Displaying the deregistration code 35 Changing the picture adjustment 35 Additional information Troubleshooting 36 Error messages 36 Understanding auto EQ error messages 38 Indicator list 39 Precautions IMPORTANT SAFEGUARDS 4 To ensure safe driving 4 To avoid battery exhaustion 5 Before you start About this unit 6 Operating environment 6 In case of trouble 6 Resetting the microprocessor 6 Demo mode 6 About this manual 6 Operating this unit Head unit 7 Remote control 7 Basic operations 8 Use and care of the remote control 9 Basic menu operations 9 ­ Menu operations identical for function settings/audio adjustments/initial settings/lists 10 Customizing menus 10 ­ Canceling a Registered Menu 10 About guide information 10 Using Bluetooth telephone 11 ­ Setting up for hands-free phoning 11 ­ Basic operations 11 Radio 12 ­ Basic operations 12 ­ Storing and recalling stations 12 ­ Function settings 12 Playing moving images 13 ­ Basic operations 13 ­ Selecting and playing files from the name list 14 ­ Browsing for a video on the iPod 14 ­ Playing DivXâ VOD content 14 ­ Function settings 15 Playing audio 17 Please read all of these instructions regarding your display and retain them for future reference. 1 Read this manual fully and carefully before operating your display. 2 Keep this manual handy as a reference for operating procedures and safety information. 3 Pay close attention to all warnings in this manual and follow the instructions carefully. [. . . ] If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be stored in Custom1. A Custom2 curve that is common for all sources can be created. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated. Up or down to adjust the level of the equalizer band. Subwoofer1 (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. Subwoofer2 (subwoofer adjustment) The cut-off frequency and output level can be adjusted when the subwoofer output is on. Only frequencies lower than those in the selected range are outputted from the subwoofer. Up or down to adjust the output level of the subwoofer. After selecting, perform the following procedures to set the system function. Brightness--Contrast--Color--Hue--Dimmer --Temperature--Black Level For details about the settings, refer to Changing the picture adjustment on page 35. Temperature can be adjusted from +3 to ­3. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). A-EQ Measurement (auto-equalizing) The auto-equalizer is an equalizer curve created by auto EQ (refer to Auto EQ (auto-equalizing) on the next page). You can turn the auto-equalizer on or off. Push left or right to adjust the next color. This unit's rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. Even if you change this setting, there will be no output unless you turn the subwoofer output on (refer to Subwoofer1 (subwoofer on/off setting) on page 26). If you change this setting, subwoofer output in the audio menu will return to the factory settings. Video Signal (video signal setting) Be sure to adjust the video signal setting to one that is suitable for your country. Bluetooth telephone data can be deleted. To protect personal information, we recommend deleting this data before transferring the unit to other persons. [. . . ] If you notice smoke, a strange noise or smell, or any other abnormal signs from the display, turn off the power immediately and consult your dealer or the nearest authorized PIONEER Service Station. At low temperatures, using the LED backlight may increase image lag and degrade the image quality due to the characteristics of the LCD screen. To protect the LED backlight, the display will darken in the following environments: -- In the direct sunlight -- Near the heater vent ! the product lifetime of the LED backlight is more than 10 000 hours. [. . . ]