User manual PIONEER CT-F7171

[. . . ] 2 Keep this manual handy as a reference for operating procedures and safety information. 3 Pay close attention to all warnings in this manual and follow the instructions carefully. 4 Do not allow other persons to use this system until they have read and understood the operating instructions. 5 Do not install the display where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including air bags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle. [. . . ] The new parental lock level is set. If you forget your code number Press RESET. Menu operations 3 Touch Registration Code. Your registration code is displayed. Setting the DivX subtitle file You can select whether or not to display DivX external subtitles. The DivX subtitles will be displayed even when Custom is selected if no DivX external subtitle files exist. Refer to Introduction of menu operations on page 31. 2 Touch DivX Subtitle on the Video Setup menu to select the desired subtitle setting. !Original ­ Display the DivX subtitles !Custom ­ Display the DivX external subtitles Notes !Up to 42 characters can be displayed on one line. If more than 42 characters are set, the line breaks and the characters are displayed on the next line. Up to 126 characters can be displayed on one screen. If more than 126 characters are set, the excess characters will not be displayed. Displaying the deregistration code If your device is already activated, deregister it by entering the deregistration code. Even if you change this setting, there will be no output unless you turn the subwoofer output on (refer to Using subwoofer output on page 33). If you change this setting, subwoofer output in the audio menu will return to the factory settings. 10 2 Display the system menu. Refer to Introduction of menu operations on page 31. 3 Touch AM Step on the initial menu to select the AM tuning step. Touching AM Step will switch the AM tuning step between 9 kHz and 10 kHz. The selected AM tuning step will appear in the display. Switching sound muting/ attenuation Sound from this system is automatically muted or attenuated when a signal from equipment with a mute function is received. Sound from this system returns to normal when the muting or attenuation is canceled. Menu operations Setting the FM tuning step !The tuning step remains at 50 kHz during manual tuning. Refer to Introduction of menu operations on page 31. 3 Touch FM Step on the system menu to select the FM tuning step. Touching FM Step will switch the FM tuning step between 50 kHz and 100 kHz. [. . . ] ±12 dB HPF: Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Hz/63 Hz/80 Hz/100 Hz/ 125 Hz Slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ­12 dB/oct USB USB standard specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB 1. 1, USB 2. 0 full speed Maximum current supply . . . . [. . . ]