User manual PIONEER CT-S540S

[. . . ] However, the method of con-necting and operating the unit is the same. Operating Environment Operating environment temperature and humidity: +5°C ­ +35°C (+41°F ­ +95°F); less than 85% RH (cooling vents not blocked). Do not install in the following locations: · Location exposed to direct sunlight or strong artificial light · Location exposed to high humidity, or poorly ventilated location H045 En TWO VOLTAGE SELECTOR SWITCHES (multi-voltage model only) Only multi-voltage model is provided with these switches. Mains voltages in Saudi Arabia are 127 V and 220 V only. Never use this model with the 110 V setting in Saudi Arabia. [. . . ] Note · When you play a multichannel source in STEREO, all channels are mixed to the front speakers. · MUSIC ­ (Pro Logic II) 5. 1 channel sound, especially suited to music sources · PROLOGIC ­ (Pro Logic II) 4. 1 channel surround sound (sound from the surround speakers is mono) · CINEMA ­ (Neo:6) 6. 1 channel sound, especially suited to movie sources · MUSIC ­ (Neo:6) 6. 1 channel sound, especially suited to music sources Note · When playing 88. 2/96 kHz PCM or 88. 2/96 kHz DTS stereo sources, only the STEREO listening mode is available. 27 En 06 Home theater sound Listening with headphones When headphones are connected, only the STEREO (default) and PHONES SURROUND (virtual surround sound for headphones) modes are available. When you connect a pair of headphones, the listening mode automatically changes to STEREO. When you disconnect them it reverts to the previous mode. 1 Press RECEIVER. Using the Sound Modes The Sound Modes create a variety of tonal and dynamic effects that can be used with multichannel or stereo sources. INPUT CH SELECT VIDEO FRONT LEVEL FM/AM TEST TONE ADVANCED SURROUND SIGNAL SELECT AUTO STEREO SOUND MODE SURROUND DIALOG MUTE MASTER VOLUME MCACC SETUP DTV MENU TOP MENU TUNE ST ST SYSTEM SETUP T. EDIT MENU 2 With headphones connected, press ADVANCED SURROUND to select PHONES SURROUND, or STEREO for stereo sound. · Press SOUND MODE to select a Sound Mode. Press repeatedly to select from: · OFF ­ No Sound Mode · MIDNIGHT ­ For effective surround sound at low volume · QUIET ­ Reduces the impact of deep bass and piercing highs · BRIGHT ­ Adds high-end `sparkle' · S. BASS ­ Adds extra power to the low-end. Note Using the Advanced Surround effects Advanced Surround effects can be used with multichannel or stereo sources for a variety of additional surround sound effects. DVD TV/SAT FRONT LEVEL DVR/VCR FM/AM TEST TONE ADVANCED SURROUND SIGNAL SELECT INPUT CH SELECT VIDEO AUTO STEREO SOUND MODE SURROUND DIALOG MUTE MASTER VOLUME MCACC SETUP DTV MENU TOP MENU TUNE ST ST SYSTEM SETUP T. EDIT MENU · Press ADVANCED SURROUND to select an Advanced Surround mode. Press repeatedly to select from: · ADV. MOVIE ­ Gives a movie theater-type sound · ADV. MUSIC ­ Gives a concert hall-type sound · TV SURR. ­ Designed for mono or stereo TV broadcasts and other sources · SPORTS ­ Designed for sports and other programs based on commentary · GAME ­ Creates surround sound from video game sources · EXPANDED ­ Creates an extra wide stereo field · 6-STEREO ­ Designed to give powerful surround sound to stereo music sources · VIRTUAL ­ Creates the impression of surround sound from just the front speakers (Sound Modes are unavailable when VIRTUAL is selected) Note · You can't use the Advanced Surround effects when the multichannel analog inputs (DVD 5. 1ch) are selected, or when playing 88. 2/96 kHz PCM or DTS sources. · You can't use the Sound Modes when the multichannel analog inputs are selected. Enhancing dialog · Default setting: DIALOG OFF The dialog enhancement feature is designed to make the dialog stand out from other background sounds in a TV or movie soundtrack. INPUT CH SELECT VIDEO FRONT LEVEL FM/AM TEST TONE ADVANCED SURROUND SIGNAL SELECT AUTO STEREO SOUND MODE SURROUND DIALOG MUTE MASTER VOLUME MCACC SETUP DTV MENU TOP MENU TUNE ST ST SYSTEM SETUP T. EDIT MENU · Press DIALOG to select the amount dialog enhancement. Each press switches the band between FM and AM. 3 Tune to a station using the TUNE +/­ buttons. Automatic tuning To search for stations in the currently selected band, press and hold either the TUNE +/­ buttons for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat this step to search for other stations. Manual tuning To change the frequency one step at a time, press the TUNE +/­ buttons. MPX mode If there is interference or noise during a stereo FM radio broadcast (the STEREO indicator is lit), or the radio reception is weak, press MPX (remote control only) to switch the receiver into mono reception mode (the MONO indicator lights). This should improve the sound quality and allow you to enjoy the broadcast. 30 En Using the tuner 07 Memorizing station presets If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. The receiver can memorize up to 30 stations, stored in three banks, or classes, (A, B and C) of 10 stations each. When memorizing FM frequencies, the receiver also stores the MPX setting (see MPX mode on page 30). RECEIVER 4 Press T. EDIT to select the station name mode (ST. NAME). 5 Use the / (cursor left/right) buttons to choose the first character. [. . . ] Like Dolby Digital, it provides six discrete channels of audio, including an LFE channel. 48 En Additional information 11 Specifications Amplifier section MAX Power Output Front. 100 W/ch ( 1 kHz, THD 10 %, 6 ) Surround back . 100 W ( 1 kHz, THD 10 %, 6 ) Furnished parts Microphone . 2 Dry cell batteries (AA size IEC R6P) . [. . . ]