User manual PIONEER CT-W550R

[. . . ] Keep this manual handy as a reference for operating procedures and precautions. Always keep the volume low enough so that you can hear sounds from outside the vehicle. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. !If you want to dispose this product, do not mix it with general household waste. [. . . ] 2 Turn MULTI-CONTROL to switch preset numbers. You can select preset number from P1 to P10. # You can also change the phone number by pushing MULTI-CONTROL up or down. 40 En Section Operating this unit 3 Press MULTI-CONTROL to select a preset number that you want to assign a phone number to. 4 Press and hold MULTI-CONTROL to display MEMORY. Push MULTI-CONTROL up or down to switch MEMORY (memory) and DELETE (delete). # If a phone number is already stored in the selected preset number, the new phone number will overwrite the old one. # For details on deleting, refer to Deleting preset numbers on this page. 02 Deleting preset numbers 1 Press LIST to display DIAL PRESET (preset number list). Refer to Using the phone number list on page 38. 2 Turn MULTI-CONTROL to switch preset numbers. # You can also change the preset phone number by pushing MULTI-CONTROL up or down. Operating this unit 3 Press MULTI-CONTROL to select a preset phone number that you want to delete. 4 Press and hold MULTI-CONTROL to display MEMORY. Push MULTI-CONTROL up or down to switch MEMORY (memory) and DELETE (delete). # About assigning , Assigning preset numbers on the previous page. 5 Select MEMORY and then press MULTI-CONTROL to display the phone book. 6 Turn MULTI-CONTROL to select the first letter of the name you are looking for. # You can also perform the same operation by pushing MULTI-CONTROL up or down. 7 Press MULTI-CONTROL to display entries. The display shows the first three Phone Book entries starting with that letter (e. g. ADD+ TO NUMBERS (international call prefix setting) !NAME VIEW (phone book name view) 42 En Section Operating this unit Notes !To return to the playback display, press BAND. DEVICE INFO is the same as that of the Bluetooth audio. (Refer to Displaying BD (Bluetooth Device) address on page 32. ) !NAME VIEW (phone book name view) cannot be selected for cellular phone registered guest phone. If cellular phone is connected to this unit via Bluetooth wireless technology with HFP (Hands-Free Profile), PBAP (Phone Book Access Profile) and SPP (Serial Port Profile), PH BOOK DOWNLOAD can be operated. If you do not operate functions other than PH BOOK DOWNLOAD, PH BOOK TRANSFER, and NUMBER DIAL within about 30 seconds, the display automatically returns to the ordinary display. 02 4 DATA DOWNLOADED is displayed and phone book download is completed. Operating this unit Entering the ID and the password If the ID and the password are requested, read the following instructions to enter the ID and the password. Up to 20 characters can be entered for the ID and up to 16 characters can be entered for the password. 1 Press DISP to switch between alphabet and numbers. Press DISP repeatedly to switch between the following character types: Alphabet--Numbers and symbols 2 Push MULTI-CONTROL up or down to select a letter. [. . . ] +6 dB to ­24 dB Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Normal/Reverse Bass boost: Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +12 dB to 0 dB FM tuner Frequency range . . . . . . . . . . . . . . . . . . . . . . 87. 5 MHz to 108. 0 MHz Usable sensitivity . . . . . . . . . . . . . . . . . . . . . [. . . ]