User manual PIONEER CT-W806DR

[. . . ] It should also be noted that this phenomenon tends to occur more easily soon after the product is purchased. If programs such as terrestrial digital broadcasts having a screen size of 4:3 are viewed 15:00 PROTV 15:00 PROTV repeatedly, the normal display area other than the black bands on the left and right sides of the screen becomes susceptible to burning. If cinema-size images are repeatedly viewed in their original size, the normal display area other than the black bands at the top and bottom of the screen becomes susceptible to burning. If programs containing a time display or station name displayed on the screen are viewed for a long period of time (or viewed repeatedly), the displayed characters may be easily burned onto the screen. [. . . ] Automatically adjusts the brightness of the image to the optimum level in accordance with the brightness level of the viewing area. This setting is shared by both the external and TV input sources. for a highly defined image in a normally bright room. This setting is shared by both the external and TV input sources. sharp imaging with the maximum contrast. Note that this mode does not allow manual image quality adjustment. This setting is shared by both the external and TV input sources. This setting is shared by both the external and TV input sources. This setting is shared by both the external and TV input sources. lowers image brightness for easier viewing. This setting is shared by both the external and TV input sources. 5 Press the button again to return to the newly adjusted image. Each press of the button toggles between "Before" and "After". If you exit the menu by pressing HOME MENU or no operation is performed for 60 seconds, all the parameter settings displayed last are stored in memory. If you want to exit the menu without performing the adjustments (or leaving the settings disabled) on the "After" screen, switch to "Before" and then exit. note · You cannot adjust any item while on the "Before" screen. When you switch to another parameter, make sure to change the display from "Before" to "After" first, otherwise you cannot select "Before". A warning message appears if you don't. If you exit the selection from the "Before" screen, the previous entry is stored in the memory and the button no longer works. If you exit the selection from the "After" screen, the new entry is stored in the memory and the button no longer works. If you move and change the "AV Selection" parameter, the new entry in the current parameter is stored in the memory and the button continues to work. You cannot compare images between different parameters on the "AV Selection" menu ("STANDARD" and "MOVIE", for example). [. . . ] HDMI Control may not operate properly if you do not use an HDMI cable that supports the HDMI 1. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. When the image from a BD/DVD player or DVD recorder connected through an HDMI Control supported AV system is switched to display on sub screen in the 2-screen or picture-in-picture mode, the sub screen turns black without displaying any image. [. . . ]