User manual PIONEER CT-X300

[. . . ] For the operations other than those described in this manual, obtain the Operation Manual for AVIC-X1R and use it as your primary reference. Even if you upgrade AVIC-X1 with this disc, the following AV functions do not become the same as AVIC-X1BT. -- The functions on the hardware buttons -- Hands-free phoning with Bluetooth wireless technology (TEL source) -- The functions for iPod p If you have already upgraded your AVIC-X1 by using CNDV-50MT, you do not need to obtain the Operation Manual for AVIC-X1R. Use the Operation Manual supplied with CNDV-50MT as your primary reference. Manual overview This manual is a supplementary document that summarises the points that will be renewed after upgrading your navigation system by using CT-X300. For customers using AVIC-D3, AVIC-X3, AVIC-X3II or CNDV-80MT By upgrading the navigation system with this disc, following points are changed. [. . . ] directories), including such products in digital form. 9 Additional Provisions with respect to the Norway Data only. You shall be prohibited from using the Data to create general purpose printed or digital maps, which are similar to the basic national products of the Norwegian Mapping Authority. (Any derivative product of the Data of Norway shall be regarded as similar to the basic national products of the Norwegian Mapping Authority if such derivative product has a regional or national coverage, and at the same time has a content, scale and format that are similar to the basic national products of the Norwegian Mapping Authority. ) Licence Agreement About the database About the database Renewed Points through this Upgrade Renewed Points through this Upgrade p To play DVD-video or CD, remove the DVD Map Disc after the "Memory navi indicator" stops flashing. 10 Additional Provisions with respect to the Poland Data only. You shall be prohibited from using the Data to create printed maps. This is the exclusive and complete Agreement between the Licensors and you regarding its subject matter. Nothing in this Agreement shall create a joint venture, partnership or principal-agent relationship between the Licensors and you. Sections 2 ­ 4 and 6 ­ 11 shall survive the expiration or termination of this Agreement. This Agreement may be amended, altered, or modified only by PIONEER. You may not assign any part of this Agreement without PIONEER' prior written consent. You acknowledge and understand that the Data may be subject to restrictions on exportation and agree to comply with any applicable export laws. When your vehicle approaches an area not stored on the disc, you will be notified three times: when the distance to the area not stored on the disc is 20 km (12 miles), 10 km (6 miles) and 5 km (3 miles) respectively. When your vehicle enters that area, a caution is given. In the areas not stored on the disc, only guidance for reaching the destination is provided. If a route calculation is operated within an areas not stored on the disc, the route might not be set from the streets you are currently driving. Also, if you set the destination in an area not stored on the disc of the disc, the system may not be able to set the route up to the destination. If the vehicle deviates from the set route in an area not stored on the disc, the Auto Reroute function will not work. Even if [Close-up of Junction] is [On], the display will not switch to an enlarged map of the junction. Even if you drive on the motorway, lane information, motorway exit numbers and motorway signs will not be displayed. Other function limitations Memory mode !Only data for areas stored on the disc can be memorised. (Data for areas not stored on the disc cannot be memorised. ) !If the vehicle enters an area not stored on the disc, preparation for memory navi mode will have to be redone after the vehicle returns to an area stored in the disc. [. . . ] The map of your surroundings is displayed. You can operate the navigation system by touching keys displayed on the screen as usual. When upgrading AVIC-X1, perform the following procedure. 8 To complete the setting, touch [Back]. CAUTION While this screen is visible, NEVER switch the key position from ACC or turn off the navigation system. No route data can be stored. You should insert the disc that contains the map data of the current position. ·Scaling up. · Change the memory area to be set to "areas stored on the DVD Map Disc". [. . . ]