User manual PIONEER DBR-TF100GB

[. . . ] Digital Terrestrial Receiver DBR-TF100GB Operating Instructions SAFETY PRECAUTIONS SAFETY PRECAUTIONS Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. 2 Contents Contents 01 Getting ready . . . . . . . . . . . . . . . . . . . 4 Included accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] · To modify the setting, press SELECT. · To move the setting, press the BLUE button. Press 5/ to move the selected timer slot and then press the BLUE button. · If you are watching a digital programme when a timer is about to start, an alert will appear on the screen about one minute before the timer starts. To view the timer programme, press SELECT. To cancel the timer programme press 2/3 to select CANCEL TIMER and press SELECT. If you do not press any buttons the timer will start at the programmed time. · When a programme set by the timer is playing, the LED turns orange. · If any button is pressed while a timer is active an alert will appear on the screen. Press EXIT to cancel the timer and return the DTR to viewing a digital programme or do nothing and the timer will continue. 2 To continue viewing the programme press 3. Taking snapshots You can take snapshots of scenes from programmes to save and view later. The image freezes on screen. 2 Press SELECT to take a snapshot. The snapshot is taken and the programme resumes normal display. 18 Advanced operation 05 · If memory is full, a warning message is displayed. · In order to free up memory to take more snapshots, see Deleting snapshots on page 20. · Sometimes attempts to take snapshots will fail due to problems with the programme data. Now you can: · Press 2/3 to view the next/previous snapshot. · Press SELECT to hide snapshot information. Press any button other than 2/3, STANDBY or EXIT to again display the snapshot information. · Press MENU or EXIT to return to normal programme viewing. · Press RETURN to return to the HOME MENU. · Press the BLUE button to change the display mode to the Movie Mode. This mode is best suited for viewing snapshots of less quickly changing displays such as movies. Viewing snapshots You can view the snapshots you have taken. 1 While viewing a programme, press MENU. The HOME MENU is displayed. · If no snapshots have been stored when Video Snapshot is selected a message is displayed. Press SELECT to return to the HOME MENU. 2 Press 5/ to select Video Snapshots. [. . . ] · The connection cables might be defective (corroded, broken, or damaged) or missing. · A download list of (digital) services is not stored in the DTR's memory. · Check all connections. · Check the aerial connection. Choose Add New Channels from the Installation menu and scan for broadcast channels. If no channels have been added, other menu screens do not display. 37 10 Troubleshooting Condition Possible cause Countermeasures · Check if the analogue channels are received properly and then check the aerial connection (aerial to the DTR, and TV aerial input connected to the DTR UHF input). [. . . ]