User manual PIONEER DC-X20Z

[. . . ] While the program update is in progress, ensure that the power supply of the Navigation System is not turned off. · When the update procedure is complete, the Navigation System will be restarted. After the system has started up again, make sure not to turn off the power supply for the Navigation System until the map of your surroundings appears. · During the update process, there is the possible risk of the "Address Book" (*) data and the "Destination History" data being lost. [. . . ] This returns you to the Route Options menu. Change: A specified area can be changed. For the next steps, see Step 3 in the "Registering an Area to Avoid" above. Delete: Delete the selected Area to Avoid. 37 MAN-DC-X20Z-EN. book Page 38 Friday, May 7, 2004 11:38 AM Using Traffic Information You can check traffic information transmitted by the FM radio service through the Radio Data System (RDS-TMC) on the display. Such traffic information is updated periodically. When you receive traffic information, the Navigation System automatically displays an icon informing you of the traffic information. You can also select whether to recalculate the route to avoid a traffic jam. (In this case, route calculation is carried out by considering traffic information within a 150 km (92 mile) radius from your current location. ) : You can sort the traffic information by distance. : When new traffic information is received, current information is changed, or old information has been removed, the list is updated to reflect the new situation. "View All" is available in viewing the incident list with new item only. You can touch "View All" to view the normal incident list. 3 Viewing traffic information 1 Touch "Information" in the Main menu, then touch "RDS-TMC". When no selection is made, the current route will be automatically selected after a short while. Chapter 3 Editing the Navigation Utilities 39 MAN-DC-X20Z-EN. book Page 40 Friday, May 7, 2004 11:38 AM When checking traffic information manually Pressing the GUIDE button on the remote control for 2 seconds or touching on the screen allows you to check for traffic information on your route. If there is any information about a traffic jam on your route, a message appears asking you whether to search for another route to avoid the traffic jam. If there is no traffic information along the route being guided, it is announced on screen and by voice. Selecting the radio station The RDS-Tuner of the navigation system automatically tunes to the radio station to receive available traffic information (RDS-TMC station). If reception is poor, you can switch to another station manually. Once the receiving radio station is selected, the system automatically tunes to stations that provide traffic information according to the location of the vehicle. Tuning to a RDS-TMC station with good reception If there is a traffic jam on the route When receiving information about a traffic jam, the message announcing the presence of a traffic jam is indicated. (Voice recognition then becomes available automatically when "Auto Voice Recognition" in Settings menu is "On". ) On this screen, you can select the following items: Yes: The route is recalculated taking the traffic jam into account. No: The message disappears, and the map display reappears. List: The list with traffic information is displayed. 1 2 Touch "Information" in the Main menu, then touch "Manual Station Search". Available radio stations can be searched automatically. If a radio station with a good reception is found, the tuning mode is stopped. Chapter 3 Editing the Navigation Utilities If there is no traffic jam information on the route If there is no traffic jam information, the message informing that there is no traffic jam information on the route, is shown. On this screen, you can select the following items: List: A list of traffic information is displayed. [. . . ] 2004 BP mark: The marks of companies displayed by this product to indicate business locations are the trade marks of their respective owners. The use of such marks in this product in no way implies any sponsorship, approval or endorsement of this product by the owners of such marks. 68 MAN-DC-X20Z-EN. book Page 69 Friday, May 7, 2004 11:38 AM Glossary This glossary explains some of the terms used in the manual. 3D Hybrid sensor The built-in sensor which enables the system to estimate your vehicle's position. A learning function increases its accuracy and two sets of learning data can be stored in memory. PC card Card-type peripheral equipment mainly used for personal computers. [. . . ]