User manual PIONEER DDJ-T1

[. . . ] The Pioneer website shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. [. . . ] The location where recorded files are stored can be checked and changed at [Recording] under [Preferences]. Loads the track selected with the cursor in each of the decks. When the [CUE] button is pressed while pausing, the cue point is set at the position where playback is pausing. When TRAKTOR's [SNAP] function is on: The cue and loop points can be set at the desired position. When TRAKTOR's [SNAP] function is on: The cue and loop points are set to the nearest [Beat Grid]. When the [CUE] button is pressed during playback, playback returns to the set cue point, cues there, and the pause mode is set (back cue). When you keep pressing the [CUE] button after returning to the cue point, playback continues as long as the button is pressed. When another button is pressed while pressing the [SHIFT] button, a different function is called out. Turn the [AUTO LOOP (MOVE GRID)] control while pressing the [SHIFT] button: The [Beat Grid] can be adjusted. This adjusts the difference with the results of analysis. -- When adjusting the [Beat Grid], create at least one [BEAT MARKER]. -- When creating [BEAT MARKER] , set the hot cue [CUE TYPE] to [Grid]. -- [CUE TYPE] (the type of hot cue) can be changed by clicking [b] to the left of the [ ] icon. The loop in point can be fine-adjusted by pressing the [IN (IN ADJUST)] button during loop playback then using the jog dial. Real-time cue: When the [IN (IN ADJUST)] button is pressed during playback, the cue point is set at the position at which the button was pressed. OUT (OUT ADJUST) button Press the [OUT (OUT ADJUST)] button at the position at which you want to stop loop playback (the loop out point) to set the loop out point. the loop out point is set , playback returns to the loop in point and loop playback starts. The loop out point can be fine-adjusted by pressing the [OUT (OUT ADJUST)] button during loop playback then using the jog dial. After switching [MOVE MODE] to [Loop Out], use the jog dial to fine-adjust the loop out point. When the [FUNCTION] button is off: The [NEEDLE SEARCH] function can be used. -- The sound at the position at which the [NEEDLE SEARCH] pad is touched can easily be played. When the [FUNCTION] is on: The desired function can be assigned. [. . . ] Using as a controller for other DJ software the DDJ-T1 also outputs the operating data for the buttons and dials in MIDI format. If you connect a computer with a built-in MIDI-compatible DJ software via a USB cable, you can operate the DJ software on this unit. The sound of music files being played on the computer can also be output from the DDJ-T1. To use as a controller for other DJ software, first make the DJ software's audio and MIDI related settings. [. . . ]