User manual PIONEER DEH-1350MP

[. . . ] Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. [. . . ] After selecting, perform the following procedures to set the function. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6. The six strongest broadcast frequencies are stored in the order of their signal strength. to cancel the storage process , press b. LOCAL (local seek tuning) Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception. FM: LOCAL 1--LOCAL 2--LOCAL 3--LOCAL 4 AM: LOCAL 1--LOCAL 2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. Depending on the version of iTunes used to write MP3 files to a disc or media file types, incompatible text stored within an audio file may be displayed incorrectly. Text information items that can be changed depend on the media. After selecting, perform the following procedures to set the function. CUSTOM allows you to create a customized setting. 1 Press SRC/OFF and hold until the unit turns off. After selecting, perform the following procedures to set the initial setting. FM (FM tuning step) The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. Tune in the stations with manual tuning or use seek tuning again. 1 Press c or d to select the FM tuning step. 50 (50 kHz)--100 (100 kHz) AM (AM tuning step) The AM tuning step can be switched between 9 kHz, the preset step, and 10 kHz. When using the tuner in North, Central or South America, reset the tuning step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10 kHz (530 kHz to 1 640 kHz allowable). # AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to AUX (auxiliary input) on this page. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. -- Place all cables away from moving parts, such as the gear shift and seat rails. [. . . ] When reattaching the trim ring, point the side with the notched tab down. Select the repeat The repeat play Depending on play range again. Range changes the repeat play unexpectedly. Range, the selected range may change when selecting another folder or track, or when fast forwarding/reversing. [. . . ]