User manual PIONEER DEH-1450B

[. . . ] Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts. to establish a safe level: · Start your volume control at a low setting. [. . . ] The stations with the strongest signals will be stored under buttons 1­6 and in order of their signal strength. Repeat Play plays the same track repeatedly. Random Play plays the tracks on a CD in random order for variety. Scan Play plays the first 10 seconds or so of each track on a CD in succession. When you find the desired track, cancel the Scan Play with the button. You can use "TITLE IN" to input up to 48 disc titles for CDs in the Built-in CD player. After the title for 48 discs have been entered, data for a new disc will overwrite the oldest one. ⷠIf you connect a Multi-CD player, you can input disc titles for up to 100 discs. There are three repeat play ranges: One-track Repeat, Disc Repeat and Multi-CD player Repeat. Default repeat play range is Multi-CD player Repeat. Select the desired repeat play range with the 2/3 buttons. Using this function lets you easily search for and select a desired disc for play. Play the disc you wish to input the disc title. When playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you cannot switch to this mode. Select letters, numbers and symbols with the 5/ buttons. Move the box left and right with the 2/3 buttons. When you have completed title input, make the 10th letter flash, then memorize by pressing the 3 button. Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. ⷠAfter the titles for 100 discs have been entered, data for a new disc will overwrite the data for the disc that has not been played back for the longest time. Follow the procedures below to play a disc for which you have input the title in a MultiCD player or a CD TEXT disc on a CD TEXT compatible Multi-CD player. Nothing is displayed for disc whose titles have not been input. Play the selected disc with the 5 button. [. . . ] ⷠIf you change the Subwoofer Controller, Subwoofer output and Non Fading output in the Audio Menu return to the factory settings. When no Subwoofer is connected to the rear speaker lead, select "REAR SP:FUL". ⷠWhen a Subwoofer is connected to the rear speaker lead, set for Subwoofer "REAR SP:S/W". ⷠWhen the Rear Speaker Lead setting is "REAR SP:S/W", you cannot change the Subwoofer controller. [. . . ]