User manual PIONEER DEH-1770

[. . . ] The front panel will be detached from the head unit. Do not allow this unit to come into contact with liquids. Also, this unit damage, smoke, and overheat could result from contact with liquids. Always keep the volume low enough so that you can hear sounds from outside the vehicle. [. . . ] Playing tracks in a random order Random play lets you play back tracks on the CD in a random order. 1 Track number indicator Shows the track currently playing. % Press 4 repeatedly to turn random play on or off. When random play is on, RDM appears in the display. Repeat play lets you hear the same track over again. % Press 5 repeatedly to turn repeat play on or off. When repeat play is on, RPT appears in the display. # Be sure to turn up the label side of a disc. # If you perform track search or fast forward/reverse, repeat play is automatically cancelled. 4 To skip back or forward to another track, press c or d. Do not use an adapter when playing 8-cm CDs. Do not insert anything other than a CD into the CD loading slot. # FAD 0 is the proper setting when only two speakers are used. 2 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)BASS (bass adjustment)TREBLE (treble adjustment) LOUD (loudness)SLA (source level adjustment) # When selecting the FM tuner as the source , you cannot switch to SLA. # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. # To return to the display of each source, press BAND. There are five stored BTB settings such as DYNAMIC, POWER, MAX, CUSTOM and FLAT that can easily recall at any time. When FLAT is selected no supplement or correction is made to the sound. This is useful to check effect of the BTB settings by switching alternatively between FLAT and set BTB setting. % Press BTB to select the desired BTB setting. [. . . ] If you insert irregular, non-round, shaped CDs they may jam in the CD player or not play properly. CDs that have cracks, scratches or are warped may not play properly. This unit conforms to the track skip function of the CD-R/CD-RW disc. The tracks containing the track skip information are skipped automatically. [. . . ]