User manual PIONEER DEH-2600UB

[. . . ] ователя Italiano Español Deutsch Nederlands Русский <QRD3200-A>1 Black plate (2, 1) Section 01 Before you start Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. [. . . ] SCAN (cycle through a variety of colors automatically) About MIXTRAX Only for DEH-X3600UI MIXTRAX technology is used to insert a variety of sound effects in between songs, allowing you to experience your music as a nonstop mix complete with visual effects. Depending on the file/song, sound effects may not be available. Turn MIXTRAX off if the visual effects it produces have adverse effects on driving. refer to Operations using the MIXTRAX button on page 6. Note When CUSTOM is selected, the customized color saved is selected. Customizing the illumination color You can create custom illumination colors for both KEY COLOUR and DISP COLOUR. And hold until the customizing illumination color setting appears in the display. Adjustment range: 0 to 60 # You cannot select a level below 20 for all three of R (red), G (green), and B (blue) at the same time. # You can also perform the same operation on other colors. Once selected, the following MIXTRAX functions can be adjusted. The function is enabled when MIXTRAX is on. SHORT PLAYBCK (short playback mode) You can select the length of the playback time. 0 minutes)—OFF (off) FLASH AREA (flash area) Selecting the illumination color Only for DEH-X3600UI 10 En <QRD3200-A>10 Black plate (11, 1) Section Using this unit Using this unit 02 You can select areas for flashing colors. When OFF is selected, the color set under ILLUMI is used as the display color. FLASH PATTERN (flash pattern) The flashing color and MIXTRAX special effects display change with changes in the sound and bass levels. SOUND LEVEL 1 to SOUND LEVEL 6 – The flash pattern changes according to the sound level. LOW PASS 1 to LOW PASS 6 – The flash pattern changes according to the bass level. RANDOM 1 – The flash pattern changes randomly according to the sound level mode and low pass mode. RANDOM 2 – The flash pattern changes randomly according to the sound level mode. RANDOM 3 – The flash pattern changes randomly according to the low pass mode. DISPLAY FX (display effect) The MIXTRAX special effects display can be turned on or off. ON (MIXTRAX special effects display)—OFF (normal display) CUT IN FX (manual cut-in effect) You can turn on or off the MIXTRAX sound effects while manually changing tracks. [. . . ] Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, smart phones, or other devices while using this product. Users of iPod with the Lightning Connector should use the Lightning to USB Cable (supplied with iPod). Users of iPod with the Dock Connector should use CD-IU51. 16 En <QRD3200-A>16 Black plate (17, 1) Appendix Additional information Additional information 3 Save the folder containing files on the USB storage device. [. . . ]