User manual PIONEER DEH-6250BT

[. . . ] Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. [. . . ] To select a phone number you want to call. When you find a phone number that you want to store in memory, press and hold one of the preset tuning buttons (1 to 6). Important Be sure to park your vehicle and apply the parking brake when performing this operation. You can also press one of the preset number buttons 1 to 6 to select a number. After selecting, perform the following procedures to set the function. Phone FUNC (phone function) You can set Auto ANSR and Ring tone from this menu. Select F-0 when only using two speakers. When Flat is selected no adjustments are made to the sound. A separate Custom1 curve can be created for each source. If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be stored in Custom1. A Custom2 curve that is common for all sources can be created. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated. After selecting, perform the following procedures to set the function. After selecting, perform the following procedures to set the audio function. This unit is equipped with a subwoofer output which can be turned on or off. SW setting 2 (subwoofer adjustment) The cut-off frequency and output level can be adjusted when the subwoofer output is on. Only frequencies lower than those in the selected range are outputted from the subwoofer. To cycle between cut-off frequency and output level of subwoofer. To switch to output level and then turn M. Adjustment range: +6 to -24 HPF setting (high pass filter adjustment) When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. SLA (source level adjustment) SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. [. . . ] Russian text to be displayed on this unit should be encoded with the following character sets: !Character sets other than Unicode that are used in a Windows environment and are set to Russian in the multi-language setting Pioneer accepts no responsibility for data lost on the USB memory/USB portable audio player even if that data is lost while using this unit. This unit supports only the following iPod models. supported iPod software versions are shown below. [. . . ]