User manual PIONEER DEH-8300SD

[. . . ] Operation Manual CD RDS RECEIVER DEH-8300SD English Contents Thank you for purchasing this PIONEER product. To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. Before You Start About this unit 3 In case of trouble 3 Demo mode 3 Reverse mode 4 Sound muting 4 About this manual 4 Operating this unit Head unit 5 Optional remote control 5 Basic Operations 6 Menu operations identical for function settings/audio adjustments/initial settings/ lists 6 Tuner 7 CD/CD-R/CD-RW and external storage devices (USB, SD) 10 iPod 12 Audio Adjustments 14 Initial Settings 16 Other Functions 17 Additional Information Troubleshooting 19 Error messages 19 Handling guidelines 21 Compressed audio compatibility (disc, USB, SD) 22 iPod compatibility 24 Sequence of audio files 24 Copyright and trademark 24 Specifications 26 2 En Section Before You Start 01 Before You Start If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. CAUTION This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. [. . . ] right to select normal phase and Normal appears in the display. Sub W. 2 (subwoofer adjustment) En 15 Operating this unit Section 02 Operating this unit Initial Settings This setting allows you to measure the length of time that elapses from when the machine is turned on and display the amount of elapsed time per set period. OFF--15Minutes--30Minutes FM step (FM tuning step) 1 1 Function display !1 Press and hold SRC/OFF until the unit turns off. and hold until the initial setting menu appears in the display. After selecting, perform the following procedures to set the initial setting. Language select (multi-language) For your convenience, this unit equips multiple language display. You can select the language best suited to your first language. English--Français--Italiano--Español-- Deutsch--Nederlands-- Calendar (setting the date) 1 Push M. C. left or right to select the segment of the calendar display you wish to set. left or right to select the segment of the clock display you wish to set. You can match the clock to a time signal by pressing M. C. If 00 to 29, the minutes are rounded down. If 30 to 59, the minutes are rounded up. (e. g. , 10:36 becomes 11:00. ) EngineTime alert (elapsed time display setting) Normally, the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. 50kHz (50 kHz)--100kHz (100 kHz) Auto PI (auto PI seek) The unit can automatically search for a different station with the same programming, even during preset recall. USB plug&play (plug and play) This setting allows you to switch your source to USB/ iPod automatically. to turn the plug and play function on or off. ON ­ When USB storage device/iPod is connected, the source is automatically switched to USB/iPod. If you disconnect your USB storage device/iPod, this unit's source is turned off. OFF ­ When USB storage device/iPod is connected, the source does not switch to USB/ iPod automatically. [. . . ] 72 dB (IEC-A network) MW tuner Frequency range . . . . . . . . . . . . . . . . . . . . . . 531 kHz to 1 602 kHz (9 kHz) Usable sensitivity . . . . . . . . . . . . . . . . . . . . . 25 µV (S/N: 20 dB) Signal-to-noise ratio . . . . . . . . . . . . . . . 62 dB (IEC-A network) CD player System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]