User manual PIONEER DEH-P310

[. . . ] Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. When replacing fuse, be sure to use only fuse of the rating prescribed on this unit. [. . . ] Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. White/black Green + Rear speaker With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Perform these connections when using a different amp (sold separately). Because of the complexity of today's technically advanced vehicle wiring systems, we recommend that your DFS Alarm be installed ONLY by a professional Pioneer installer. Affix the included deterrent stickers to the inside of the front door windows. Set DFS Alarm to recognize ground trigger from DFS Alarm Setting Menu. Set DFS Alarm to recognize positive trigger from DFS Alarm Setting Menu. The brown lead provides a +12 V, pulsed output while alarm is sounding. This lead has a maximum current capability of 500 mA and can be used to trigger a relay to sound a siren, horn or flash lights. This lead is used to trigger DFS Alarm when any door is opened and may be connected to either positive or negative (+/­) type door pin switches. For horns or lights requiring ground trigger · This lead is a pulsed positive (+) output capable of driving up to 2 relays (500 mA) max. Use this lead to trigger relays for siren, horn, honk or flashing lights. After hookup, simply set door system type from DFS Alarm Setting Menu. [. . . ] Frame Insert the release pin into the hole in the bottom of the frame and pull out to remove the frame. Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place. [. . . ]