User manual PIONEER DEH-P3150

[. . . ] To protect the wiring, wrap adhesive tape around them where they lie against metal parts. Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, handbrake and seat rails. [. . . ] To avoid short-circuiting, cover the disconnected lead with insulating tape. Especially, insulate the unused speaker leads without fail. There is a possibility of short-circuiting if the leads are not insulated. If this unit is installed in a vehicle that does not have an ACC (accessory) position on the ignition switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours. IP-BUS input (Blue) Antenna jack This Product Multi-CD player (sold separately) Rear output Fuse Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal. System remote control Yellow To terminal always supplied with power regardless of ignition switch position. This product conforms to new cord colors. Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function. White/black Green + Rear speaker With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers. Perform these connections when using a different amp (sold separately). [. . . ] Keeping the keys pressed against the sides of the unit, pull the unit out. This unit can be properly installed either from "Front" (conventional DIN Front-mount) or "Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of unit chassis). [. . . ]