User manual PIONEER DEH-P410UB

[. . . ] If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). [. . . ] If you change this setting, subwoofer output in the audio menu will return to the factory settings. Both rear speaker lead outputs and RCA rear output are switched simultaneously in this setting. This unit's rear output (rear speaker lead output and RCA rear output) can be used for fullrange speaker (REAR SP :FULL/ PREOUT :REAR) or subwoofer (REAR SP :SUB W/PREOUT :SUB W) connection. If you switch the rear output setting to REAR SP :SUB W, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp. initially , the unit is set for rear full-range speaker connection (REAR SP :FULL). When rear output is connected to full range speakers (when REAR SP :FULL is selected), you can connect the RCA subwoofer output to a subwoofer. In this case, you can select whether to use the subwoofer controller's (low pass filter, phase) built-in PREOUT :SUB W or the auxiliary PREOUT :REAR. 2 Press MULTI-CONTROL to turn the ever scroll on. # To turn the Ever Scroll off, press MULTI-CONTROL again. Press to switch the segment you wish to set between left and right. Turn to change the setting of each segment. # If the auxiliary setting is not turned on, AUX cannot be selected. 1 After you have selected AUX as the source, use MULTI-CONTROL and select FUNCTION to display TITLE INPUT. There are two methods to connect auxiliary devices to this unit. When connecting auxiliary device using a stereo mini plug cable % Insert the stereo mini plug into the input jack on this unit. For more details, refer to Head unit on page 7. Using the external unit External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit. When connecting auxiliary device using an IPBUS-RCA Interconnector (sold separately) % Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) to connect this unit to auxiliary device featuring RCA output. # You can only make this type of connection if the auxiliary device has RCA outputs. Functions allocated to the following operations are different depending on the connected external unit. [. . . ] However, a practical hierarchy of folder is less than two tiers. Up to 99 folders on a disc can be played back. The SD memory card is only available for DEHP4100SD. about USB storage device compatibility , refer to Specifications on page 58. [. . . ]