User manual PIONEER DEH-P4650MP

[. . . ] Multi-CD control High power CD/MP3/WMA player with FM/AM tuner Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Before You Start About this manual 4 Precautions 4 Features 4 About WMA 4 Use and care of the remote control 5 Installing the battery 5 Using the remote control 5 Protecting your unit from theft 5 Removing the front panel 6 Attaching the front panel 6 Whats What Head unit 7 Remote control 7 Power ON/OFF Turning the unit on 9 Selecting a source 9 Turning the unit off 9 Tuner Listening to the radio 10 Introduction of advanced tuner operation 11 Storing and recalling broadcast frequencies 11 Tuning in strong signals 11 Storing the strongest broadcast frequencies 12 Built-in CD Player Playing a CD 13 Introduction of advanced built-in CD player operation 14 Repeating play 14 Playing tracks in a random order 14 Scanning tracks of a CD 14 Pausing CD playback 15 Using compression and BMX 15 Selecting the search method 15 Searching every 10 track in the current disc 16 Using disc title functions 16 Entering disc titles 16 Displaying disc titles 17 Using CD TEXT functions 17 Displaying titles on CD TEXT discs 17 Scrolling titles in the display 17 MP3/WMA/WAV Player Playing MP3/WMA/WAV 18 Introduction of advanced built-in CD player (MP3/WMA/WAV) operation 20 Repeating play 20 Playing tracks in a random order 20 Scanning folders and tracks 21 Pausing MP3/WMA/WAV playback 21 Selecting the search method 21 Searching every 10 track in the current folder 22 Using compression and BMX 22 Switching the tag display 22 Displaying text information on MP3/WMA disc 22 Displaying text information on WAV disc 23 Scrolling text information in the display 23 Multi-CD Player Playing a CD 24 50-disc multi-CD player 24 Introduction of advanced multi-CD player operation 25 Repeating play 25 Playing tracks in a random order 25 Scanning CDs and tracks 26 Pausing CD playback 26 Using ITS playlists 26 Creating a playlist with ITS programming 26 Playback from your ITS playlist 27 Erasing a track from your ITS playlist 27 Erasing a CD from your ITS playlist 28 Using disc title functions 28 Entering disc titles 28 Displaying disc titles 29 Using CD TEXT functions 29 Displaying titles on CD TEXT discs 29 Scrolling titles in the display 29 Using compression and bass emphasis 29 Audio Adjustments Introduction of audio adjustments 30 Using balance adjustment 30 Using the equalizer 30 Recalling equalizer curves 31 Adjusting equalizer curves 31 Fine adjusting equalizer curve 31 Adjusting loudness 32 Front image enhancer (F. [. . . ] You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 3 Track number indicator Shows the track currently playing. 3 Select a disc you want to listen to with the 16 buttons. for discs located at 1 to 6 , press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. Only those functions described in this manual are supported for 50-disc multi-CD players. Press c or d until the desired repeat range appears in the display. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)RDM (random play) SCAN (scan play)ITS-P (ITS play)PAUSE (pause)COMP (compression and DBE) If you select other discs during repeat play, the repeat play range changes to MCD. If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, MCD and DSC. Tracks will play in a random order within the previously selected MCD or DSC ranges. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. There are three repeat play ranges for the multi-CD player: MCD (multi-CD player repeat), TRK (one-track repeat) and DSC (disc repeat). Note If you turn random play on during DSC and then return to the playback display, DRDM appears in the display. Play will resume at the same point that you turned pause on. Note You can also turn pause on or off by pressing PAUSE. While you are using DSC, the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD, the beginning of the first track of each disc is played for about 10 seconds. The first 10 seconds of each track of the current disc (or the first track of each disc) is played. 4 When you find the desired track (or disc) press b to turn scan play off. [. . . ] The contents can be freely edited using software with ID3 Tag editing functions. Although the tags are restricted to the number of characters, the information can be viewed when the track is played back. iSO9660 format This is the international standard for the format logic of CD-ROM folders and files. For the ISO9660 format, there are regulations for the following two levels. [. . . ]