User manual PIONEER DEH-P4770MP

[. . . ] ) 33 Adjusting source levels 34 Initial Settings Adjusting initial settings 35 Setting the FM tuning step 35 Switching Auto PI Seek 35 Switching the warning tone 35 Switching the auxiliary setting 36 Other Functions Using the AUX source 37 Selecting AUX as the source 37 Setting the AUX title 37 Additional Information Understanding built-in CD player error messages 38 Cellular telephone muting 38 CD player and care 38 CD-R/CD-RW discs 39 MP3 files 39 About folders and MP3 files 40 Terms 41 Specifications 42 This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. [. . . ] 4 When you find the desired track (or folder) press b to turn scan play off. Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, FLD and DSC. Tracks will play in a random order within the previously selected FLD or DSC ranges. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. After track or folder scanning is finished, normal playback of the tracks will begin again. If you turn scan play on during FLD and then return to the playback display, FSCN appears in the display. Play will resume at the same point that you turned pause on. Note You can also turn pause on or off by pressing PAUSE. Searching every 10 track in the current folder If the current folder contains over 10 tracks, you can search every 10 track. When the one folder contains a lot of tracks, you can roughly search the track you want to play. Refer to Selecting the search method on this page. for discs located at 1 to 6 , press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. Only those functions described in this manual are supported for 50-disc multi-CD players. Press c or d until the desired repeat range appears in the display. If you select other discs during repeat play, the repeat play range changes to MCD. If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)RDM (random play) SCAN (scan play)ITS-P (ITS play)PAUSE (pause)COMP (compression and DBE) Playing tracks in a random order Random play lets you play back tracks in a random order within the repeat range, MCD and DSC. Tracks will play in a random order within the previously selected MCD or DSC ranges. Note If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. There are three repeat play ranges for the multi-CD player: MCD (multi-CD player repeat), TRK (one-track repeat) and DSC (disc repeat). Note If you turn random play on during DSC and then return to the playback display, DRDM appears in the display. [. . . ] Read the precautions with CD-R/CD-RW discs before using them. 1 and 48 kHz frequencies are played back, the emphasis function is valid. 1, 48 kHz sampling frequencies can be played back. There is no compatibility with the MP3i (MP3 interactive) or mp3 PRO format. [. . . ]