User manual PIONEER DEH-P4850MP

[. . . ] Initial Settings Adjusting initial settings 37 Setting the FM tuning step 37 Switching Auto PI Seek 37 Switching the warning tone 37 Switching the auxiliary setting 38 Other Functions Using the AUX source 39 Selecting AUX as the source 39 Setting the AUX title 39 Additional Information Understanding built-in CD player error messages 40 Cellular telephone muting 40 CD player and care 40 CD-R/CD-RW discs 41 MP3, WMA and WAV files 41 MP3 additional information 42 WMA additional information 42 WAV additional information 42 About folders and MP3/WMA/WAV files 42 Terms 44 Specifications 46 The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. [. . . ] The first 10 seconds of each track of the current folder (or the first track of each folder) is played. 4 When you find the desired track (or folder) press b to turn scan play off. You can switch the search method between fast forward/reverse and searching every 10 track. # If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION. After track or folder scanning is finished, normal playback of the tracks will begin again. If you turn scan play on during FLD and then return to the playback display, FSCN appears in the display. Press c or d until the desired search method appears in the display. ROUGH Searching every 10 track Searching every 10 track in the current folder If the current folder contains over 10 tracks, you can search every 10 track. When the one folder contains a lot of tracks, you can roughly search the track you want to play. 2 Press and hold c or d to search every 10 track in the current folder. Press a or b repeatedly to switch between the following settings: COMP OFFCOMP 1COMP 2 COMP OFFBMX 1BMX 2 # If the current folder contains less than 10 tracks, pressing and holding d recalls the last track of the folder. You can use this unit to control a multi-CD player, which is sold separately. These are the basic steps necessary to play a CD with your multi-CD player. More advanced CD operation is explained starting on the next page. 3 Track number indicator Shows the track currently playing. 3 Select a disc you want to listen to with the 16 buttons. for discs located at 1 to 6 , press the corresponding number button. If you want to select a disc located at 7 to 12, press and hold the corresponding numbers such as 1 for disc 7, until the disc number appears in the display. Only those functions described in this manual are supported for 50-disc multi-CD players. Press c or d until the desired repeat range appears in the display. Press FUNCTION repeatedly to switch between the following functions: RPT (repeat play)RDM (random play) SCAN (scan play)ITS-P (ITS play)PAUSE (pause)COMP (compression and DBE) If you select other discs during repeat play, the repeat play range changes to MCD. If you perform track search or fast forward/reverse during TRK, the repeat play range changes to DSC. [. . . ] The sound quality of MP3 files generally becomes better with an increased bit rate. This unit can play recordings with bit rates from 8 kbps to 320 kbps, but in order to be able to enjoy sound of a certain quality, we 1 First level 2 Second level 3 Third level It is not possible to check folders that do not include MP3/WMA/WAV files. MP3/WMA/WAV files in up to 8 tiers of folders can be played back. However, there is a delay in the start of playback on discs with numerous tiers. [. . . ]