User manual PIONEER DEH-P5800MP

[. . . ] There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Private households in the 25 member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar new one). For countries not mentioned above, please contact your local authorities for the correct method of disposal. By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health. [. . . ] A different icon can be assigned for each different user phone. Each time MULTI-CONTROL is pushed left or right, the icons are switched in the following order: icon 1 (icon 1)--icon 2 (icon 2)--icon 3 (icon 3)--icon 4 (icon 4)--icon 5 (icon 5) 3 Press MULTI-CONTROL to assign the icon to the user phone. If this function is on, this unit automatically answers all incoming calls. This feature cannot be set for each different user phone. # To turn automatic answering function off, press MULTI-CONTROL again. Note If both the automatic reject and automatic answer functions are set to ON, the automatic reject is prioritized and all incoming calls are automatically rejected. Each device address consists of a 12digit of hexadecimal string. You can display the BD address of your cellular phone and this unit. Displaying BD address of your cellular phone Each time MULTI-CONTROL is pushed up or down, the registration assignment is switched in the following order: Phone1 (user phone 1)--Phone2 (user phone 2)--Phone3 (user phone 3)--Guest1 (guest phone 1)--Guest2 (guest phone 2) # If the assignment is empty, No data is displayed and the operation is not possible. About the system version, refer to Displaying system version for repair on this page. Should this unit fails to operate properly and you consult with dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. This unit is now on standby for connection from Bluetooth audio player. 5 Use your Bluetooth audio player to connect to this unit. Refer to the instruction manual that came with your Bluetooth audio player for detailed instructions. For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wireless connection. If you do not operate the function within about 30 seconds, the display is automatically returned to the playback display. Depending on Bluetooth audio players connected to this unit, function operations may not be correctly operated. Once connected via Bluetooth wireless technology, "Play", "Stop" and other functions on Bluetooth audio player can be controlled from this unit's function menu. Turn MULTI-CONTROL clockwise or counterclockwise to switch between the functions in the following order: Disconnect audio (disconnect audio)--Play (Play)--Stop (Stop)--Pause (pause)-- Device INFO. (device information) # If a Bluetooth audio player is connected via A2DP profile, only Disconnect audio and Device INFO. # If a Bluetooth audio player has not been connected to this unit yet, Connection open and Device INFO. Appear in the function menu and other functions are not available. [. . . ] This profile is used for transferring the phonebook Packet write This is a general term for a method of writing on CD-R, etc. This protocol is to search for available services and service characteristics on other devices featuring Bluetooth wireless technology. vBR VBR is short for variable bit rate. Generally speaking CBR (constant bit rate) is more widely used. [. . . ]