User manual PIONEER DEH-P5950IB

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. ­ Searching every 10 tracks in the current disc or folder 13 ­ Using disc title functions 13 ­ Displaying text information on disc 13 Playing songs on iPod 14 ­ Basic Operations 14 ­ Browsing for a song 15 ­ Displaying text information on iPod 15 ­ Introduction of advanced operations 15 ­ Repeating play 15 ­ Playing songs in a random order (shuffle) 16 ­ Playing all songs in a random order (shuffle all) 16 ­ Pausing a song 16 Audio Adjustments 16 ­ Introduction of audio adjustments 16 ­ Using balance adjustment 17 ­ Using the equalizer 17 ­ Adjusting loudness 18 ­ Using subwoofer output 18 ­ Using the high pass filter 19 ­ Boosting the bass 19 ­ Front image enhancer (F. [. . . ] There are six stored equalizer curves which you can easily recall at any time. You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ-LOW/EQ-MID/ EQ-HIGH). This unit is equipped with a subwoofer output which can be turned on or off. # To turn subwoofer output off, press b. 2 Press AUDIO to select the band for adjustment from among low, mid and high. When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. 50--63--80--100--125 (Hz) Only frequencies lower than those in the selected range are outputted from the subwoofer. When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are outputted from the front or rear speakers. You can select the frequency you want to cut. Function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. # To turn high pass filter off, press b. 50--63--80--100--125 (Hz) Only frequencies higher than those in the selected range are outputted from the front or rear speakers. Function on, use the balance adjustment (refer to page 17) and adjust front and rear speaker volume levels until they are balanced. Bass boost function boosts the bass level of sound lower than 100 Hz. The more the bass level is increased, the more the bass sound is emphasized and the entire sound becomes powerful. When using this function with the subwoofer, the sound under the cut-off frequency is boosted. # You can also select the bass boost setting by pressing and holding SW. SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. Settings are based on the FM tuner volume level, which remains unchanged. 1 Compare the FM tuner volume level with the level of the source you wish to adjust. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to The AM tuner volume level can also be adjusted with source level adjustments. [. . . ] Also, wipe any dump discs with a soft cloth. Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions and so on. Road shocks may interrupt disc playback. Read the precautions with discs before using them. [. . . ]