User manual PIONEER DEH-P7750MP

[. . . ] Operation is the same as when using buttons on the head unit. ATT button This lets you quickly lower volume level (by about 90%). Press once more to return to the original volume level. This product features a number of sophisticated functions ensuring superior reception and operation. [. . . ] When you turn on ITS play, tracks from ITS memory in the multi-CD player will begin to play. Playback begins of those tracks from ITS memory within the selected repeat range: multi-CD player repeat or disc repeat. When the ITS play mode is exited while ITS play is on, "ITS" appears on the basic display. note: · If no track in the current play range is programmed for ITS play, "ITS empty" is displayed. In this mode, you can also use to erase the currently playing track from ITS memory. Erasing a CD from ITS memory When you want to erase all tracks of a CD from ITS memory, you can do so when ITS play is off. Press 5 or to select the CD you want to erase from ITS memory. Refer to "Playback from ITS memory" on this page. Press CLEAR to erase all tracks on the currently playing CD from ITS memory. "Memory deleted" is displayed briefly and all tracks on the currently playing CD are erased from ITS memory. Erasing a track from ITS memory When you want to erase a track from ITS memory, you can do so when ITS play is on. For operation of the announcement support, refer to "Setting the announcement support interruption" on page 38. You can store data from up to six dynamic label transmissions under the buttons MEMO1 ­ MEMO6. Press and hold any of the buttons MEMO1 ­ MEMO6 until "DAB memo" appears to store the desired dynamic label. If you do not operate the function within about 30 seconds, the display is automatically returned. Press FUNC and then press AS to select the announcement support mode. Press the corresponding button to turn the desired announcement support on. Available PTY search lets you see the list of available PTYs that is in the current ensemble and select one of them to receive. Available PTY search function is different from PTY search function. With this product, you can operate only the available PTY search. Press FUNC and then press PTY to select the available PTY search mode. You can also use 2, 3 and 5 to select and turn on the desired announcement. [. . . ] Turn off the CD player and wait until the CD player cools down. When correct measurement of car interior acoustic characteristics is not possible using the autoequalizer, an error message may appear on the display. If an error message appears on the display, refer to the table below to see what the problem is and the suggested method of correcting the problem. display ERROR CHECK MIC ERROR CHECK SPEAKER Cause Microphone is not connected. [. . . ]