User manual PIONEER DEH-P8200R

[. . . ] Multi-CD control High power CD player with RDS tuner Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers. This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion--and, most importantly, without affecting your sensitive hearing. [. . . ] One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON. The ITS function allows you to search for the track you wish to play when a Multi-CD player is installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs. Programmed tracks are played within the selected repeat play range in the "Repeat Play" on page 29. After 100 discs have been programmed, data for a new disc will overwrite the data for the disc that has not been played back for the longest time. ITS play of tracks is performed within the play range explained in the "Repeat Play" section. After selecting the desired repeat play range from those referred to in "Repeat Play" on page 29, switch ITS Play ON. Select the track you wish to erase, during ITS Play. Erase the track program with the button. ITS is canceled and playback of the next ITS-programmed track begins. If there are no more programmed tracks in the current range, "ITS Empty" is displayed and normal play resumes. Select the disc you wish to erase, while the disc is playing. You can input Titles up to 10 letters long for up to 100 discs. Using this function lets you easily search for and select a desired disc for play. Play the disc you wish to input the disc title. When playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you cannot switch to this mode. Select the desired character type with button 1. Each press of button 1 changes the character type in the following order: Alphabet (Upper case), Numbers and Symbols = Alphabet (Lower case) Note: Select letters, numbers and symbols with the 5/ buttons. Move the box left and right with the 2/3 buttons. When you have completed title input, make the 10th letter flash, then memorize by pressing the 3 button. Titles remain in memory, even after the disc has been removed from the magazine, and are recalled when the disc is reinserted. After the titles for 100 discs have been entered, data for a new disc will overwrite the data for the disc that has not been played back for the longest time. [. . . ] When a call is made or received, no source change is possible. When a call is made or received, only two adjustments (Volume and Fader/Balance) are possible. Operation returns to normal when the phone connection is ended. Telephone standby can be selected as a source when "TELstandby:ON" in the TEL 2 mode is selected in the Initial Setting Menu. [. . . ]