User manual PIONEER DEH-P835R

[. . . ] The RDS (radio data system) function operates only in areas with FM stations broadcasting RDS signals. These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation. By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. CAUTION ! [. . . ] For more details, refer to Reverse mode on page 7. Switching the feature demo The feature demo automatically starts when power to this unit is turned off while the ignition switch is set to ACC or ON. 1 Use MULTI-CONTROL to select Demonstration in the initial setting menu. Refer to Adjusting initial settings on page 33. 2 Press MULTI-CONTROL to turn the feature demo on. # To turn the feature demo off, press MULTI-CONTROL again. Switching the ever scroll When ever scroll is set to on, CD text information scrolls continuously in the display. Set to off if you prefer the information to scroll just once. 1 Use MULTI-CONTROL to select Ever-scroll in the initial setting menu. Refer to Adjusting initial settings on page 33. 2 Press MULTI-CONTROL to turn the ever scroll on. # To turn the Ever Scroll off, press MULTI-CONTROL again. 36 En Section Initial Settings Activating the BT Audio source You need to activate the BT Audio source in order to use a Bluetooth audio player. You can only operate this function when Bluetooth adapter (e. g. 1 Use MULTI-CONTROL to select BT AUDIO in the initial setting menu. Refer to Adjusting initial settings on page 33. This auxiliary device is automatically set to AUX1. External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit. Basic operations of the external unit are explained below. Allocated functions are different depending on the connected external unit. For details concerning functions, refer to external unit's owner's manual. AUX2 source: When connecting auxiliary device using an IPBUS-RCA Interconnector (sold separately) % Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) to connect this unit to auxiliary device featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner's manual. This auxiliary device is automatically set to AUX2. # You can only make this type of connection if the auxiliary device has RCA outputs. Selecting the external unit as the source % Press SRC/OFF to select EXTERNAL as the source. Basic operation Functions allocated to the following operations are different depending on the connected external unit. For details concerning functions, refer to the connected external unit's owner's manual. % Press and hold BAND/ESC. Selecting AUX as the source % Press SRC to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. [. . . ] ­18 dB/oct Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6 dB to ­24 dB Phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Normal/Reverse Bass boost: Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +12 dB to 0 dB FM tuner Frequency range . . . . . . . . . . . . . . . . . . . . . . [. . . ]