Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER DEH-P88RS-II. We hope that this PIONEER DEH-P88RS-II user guide will be useful to you.
Lastmanuals help download the user guide PIONEER DEH-P88RS-II.
Detailed instructions for use are in the User's Guide.
[. . . ] This will damage the lead insulation and cause a very dangerous short. If you do, the protection circuit may fail to work when it should. Never feed power to other equipment by cutting the insulation of the power supply lead of the unit and tapping into the lead. the current capacity of the lead will be exceeded , causing overheating. [. . . ] Yellow (2*) To terminal always supplied with power regardless of ignition switch position. ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. This product IP-BUS input (Blue) IP-BUS cable Blue/white To system control terminal of the power amp (max. In another type of vehicle, never connect 6* and 7*. ) White : Front left + or Middle range left + White/black : Front left or Middle range left Gray : Front right + or Middle range right + Gray/black : Front right or Middle range right Green : Rear left + or High range left + Green/black : Rear left or High range left Violet : Rear right + or High range right + Violet/black : Rear right or High range right : Front left + : Front left : Front right + : Front right : Rear left + : Rear left : Rear right + : Rear right ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. In another type of vehicle, never connect 6* and 7*. Perform this connection when using the optional amplifier. If using this system, we recommend that this unit's internal amp is turned off. ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. In another type of vehicle, never connect 6* and 7*. ) Blue/white (6*) Speaker leads White : Middle range left + White/black : Middle range left Gray : Middle range right + Gray/black : Middle range right Green : High range left + Green/black : High range left Violet : High range right + Violet/black : High range right ISO connector Note: In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. In another type of vehicle, never connect 6* and 7*. [. . . ] (When reattaching the frame , point the side with a groove downwards and attach it. ) It becomes easy to remove the frame if the front panel is released. This product features two operation modes: the 3-way network mode (NW) and the standard mode (STD). You can switch between modes as desired. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER DEH-P88RS-II
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER DEH-P88RS-II will begin.
PIONEER DEH-P88RS-II annexe 1 (1748 ko)
