User manual PIONEER DEXP99RS DOOR MUTE

[. . . ] ) 19 ­ Adjusting source levels 19 Initial Settings 20 ­ Adjusting initial settings 20 ­ Setting the date and clock 20 ­ Setting the FM tuning step 21 ­ Setting the AM tuning step 21 ­ Switching the warning tone 21 ­ Switching the auxiliary setting 21 ­ Switching the dimmer setting 21 ­ Setting the rear output and subwoofer controller 21 ­ Switching the feature demo 22 ­ Switching the Ever Scroll 22 Before You Start About this unit 4 Visit our website 4 Protecting your unit from theft 5 ­ Removing the front panel 5 ­ Attaching the front panel 5 About the demo mode 5 Use and care of the remote control 6 ­ Installing the battery 6 ­ Using the remote control 6 Operating this unit What's What 7 ­ Head unit 7 ­ Remote control 7 Basic Operations 8 ­ Power ON/OFF 8 ­ Selecting a source 8 ­ Adjusting the volume 9 ­ Turning the unit off 9 Tuner 9 ­ Basic Operations 9 ­ Storing and recalling broadcast frequencies 10 ­ Introduction of advanced operations 10 ­ Storing the strongest broadcast frequencies 10 ­ Tuning in strong signals 10 Built-in CD Player 11 ­ Basic Operations 11 ­ Introduction of advanced operations 12 ­ Selecting a repeat play range 12 ­ Playing tracks in random order 12 ­ Scanning folders and tracks 12 ­ Pausing disc playback 12 ­ Using compression and BMX 12 Other Functions 23 ­ Turning the clock display on or off 23 ­ Using the AUX source 23 Available accessories Playing songs on USB portable audio player/ USB memory 24 ­ Basic Operations 24 ­ Introduction of advanced operations 24 ­ Displaying text information of an audio file 25 Multi-CD Player 25 ­ Basic Operations 25 ­ Introduction of advanced operations 26 ­ Using ITS playlists 27 ­ Using disc title functions 28 ­ Using CD TEXT functions 28 TV tuner 29 ­ Basic Operations 29 ­ Introduction of advanced operations 29 ­ Storing and recalling broadcast stations 29 ­ Storing the strongest broadcast stations sequentially 29 Bluetooth adapter 30 Additional Information Troubleshooting 31 Understanding error messages 31 Handling guideline of discs and player 31 Dual Discs 32 Compressed audio files 32 ­ Example of a hierarchy 33 ­ Compressed audio compatibility 33 About handling the iPod 33 ­ About iPod settings 33 Specifications 34 Before You Start About this unit Do not allow this unit to come into contact with liquids. Also, this unit damage, smoke, and overheat could result from contact with liquids. Always keep the volume low enough so that you can hear sounds from outside the vehicle. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. [. . . ] % Press and hold FUNCTION to turn shuffle all on during the playback display. sHUFFLE ALL is displayed briefly and all songs on the iPod will play randomly. Note You can also turn shuffle all on in the menu that appears with the pressing of FUNCTION. Press AUDIO repeatedly to switch between the following audio functions: FADER (balance adjustment)--EQ (equalizer curve adjustment)--LOUDNESS (loudness)-- SUBWOOFER (subwoofer on/off setting)-- SUBWOOFER (subwoofer setting)-- HP-FILTER (high pass filter)--BASSBOOSTER (bass boost)--FIE (front image enhancer)-- SLA (source level adjustment) # You can select the SUBWOOFER (subwoofer setting) only when subwoofer output is turned on in SUBWOOFER (subwoofer on/off setting). # To return to the display of each source, press BAND. # If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. You can change the fader/balance setting so that it can provide you an ideal listening environment in all occupied seats. # FADER 0 is the proper setting when only two speakers are used. When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. Press EQ repeatedly to switch between the following equalizers: POWERFUL--NATURAL--VOCAL--CUSTOM --FLAT--SUPERBASS # You can then select another band and adjust the level. The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. External unit 1 and external unit 2 are set to the same source level adjustment volume automatically. Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press FUNCTION and hold until function name appears in the display. 3 Press FUNCTION repeatedly to switch between the following settings: CALENDAR (date and clock)--FM STEP (FM tuning step)--AM STEP (AM tuning step)-- WARNING TONE (warning tone)--AUX1 (auxiliary input1)--AUX2 (auxiliary input2)-- DIMMER (dimmer)--S/W CONTROL (rear output and subwoofer controller)-- DEMONSTRATION (feature demo)-- EVER-SCROLL (ever scroll) Use the following instructions to operate each particular setting. # To cancel initial settings , press BAND. # You can also cancel initial settings by holding down FUNCTION until the unit turns off. The FM tuning step employed by seek tuning can be switched between 100 kHz, the preset step, and 50 kHz. Auxiliary equipments connected to this unit can be activated individually. About connecting or using auxiliary equipments, refer to Using the AUX source on page 23. [. . . ] Store discs in their cases when not in use. Do not attach labels, write on or apply chemicals to the surface of the discs. To clean a CD, wipe the disc with a soft cloth outward from the center. Leave it to adjust to the warmer temperature for about one hour. [. . . ]