User manual PIONEER DJM-700-K

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] Hold the FADER CURVE/BANK EDIT button depressed for about one second to change the screen to the main page effect select menu (settable independently for each channel). Rotate the TIME/SELECT dial to select the effect to be allocated to each button from the list of 50 effects displayed (see page 39, "Presetting effects"). From this menu, BPM AUTO can be selected. By rotating the front panel FADER CURVE dial, the various attenuation responses can be set in 33 steps, and each step number also displayed. The amount of cross fader lag is also given a numerical display. Changing between the touch panel's four basic display patterns (A, B, C, D) is performed by pressing the operating buttons at the panel's sides. This function automatically counts the track's speed in BPM (Beats Per Minute), displaying the results as a numerical value. The functions does not merely count the bass beat, but uses a computer to calculate the track's original BPM required by the DJ. The display provides a visual standard in addition to the human ear, thus allowing the DJ to quickly match two tracks possessing differing speeds. When auto mode is used to count BPM, the calculated BPM value is displayed on the LCD panel, allowing quick matching of tracks with differing speeds. * Some tracks may not be counted properly, in which case manual count should be used. If the cue point has already been set, there is no need to set the CD player again for standby at the cue point. After playback has once begun, moving the channel fader lever back to the "0" scale mark will cause the CD player to return to its cue point and enter the standby mode again (back cue). FADER OPERATIONS Start playback with cross fader 1 To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [C. When using cross fader lever to start the CH-1 CD player, set the front panel C. 1] position; when using the cross fader lever to start the CH-2 CD player, set the front panel C. 3 Move the cross fader lever to the side opposite from the channel you wish to start. 4 Adjust the CD player to its cue point and set for cue point standby. 5 Begin moving the cross fader lever with the timing you wish, thereby beginning playback on the CD player. If the cue point has already been set, there is no need to set the CD player again for standby at the cue point. If the cross fader lever is moved fully after the beginning of playback, the opposite channel's CD player will return to its cue point and enter standby there (back cue). In time with BPM, outputs repeat sound once. [. . . ] Changes frequency band subject to phase effect. Left half changes volume, right half changes volume of the set frequency. Left half changes volume, right half changes volume of neighboring frequency. Left half changes volume, right half changes volume of neighboring frequency. [. . . ]