User manual PIONEER DJM-850-W

[. . . ] Operating Instructions Mode d’emploi Bedienungsanleitung Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] Set to the edge opposite the side on which the channel you want to use with the fader start function is set. The DJ player pauses playback at the cue point. If you set the crossfader back to the original position, the player instantaneously returns to the cue point already set and pauses playback (back cue). Audio is output from the [BOOTH] terminal Turn the [BOOTH MONITOR] control. Adjusts the level of audio signals output from the [BOOTH] terminal. Using a microphone 1 Connect a microphone to the [MIC1] or [MIC2] terminal. When set to [TALK OVER], the sound of channels other than the [MIC] channel is attenuated by 18 dB (default) when a sound of -10 dB or greater is input to the microphone. The [TALK OVER] sound attenuation level can be changed at [USER SETUP] screen. For instructions on changing this, see Changing the settings on page 23. For instructions on changing it, see Changing the settings on page 23. 3 Turn the [MIC1 LEVEL] or [MIC2 LEVEL] control. Adjust the level of the sound output from the [MIC] channel. Pay attention that rotating to the extreme right position outputs a very loud sound. 4 Input audio signals to the microphone.  Adjusting the sound quality Turn the [MIC] channels’ [EQ (HI, LOW)] controls. Refer to Specifications on page 27 for the range of sound that can be adjusted by each control. Switching between monaural and stereo audio This switches the sound output from the [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL MASTER OUT] and [USB] terminals between monaural and stereo. To adjust the sound output from the [USB] terminals, select [REC OUT] at [Mixer Audio Output] in the setting utility.  Adjusting the L/R balance of audio The left/right balance of the sound output from the [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL MASTER OUT] and [USB] terminals can be adjusted. En 15 Advanced Operations 6 Parameter display section SOUND COLOR FX These effects change in association with the [COLOR] controls for the different channels. 7 8 % (ms) Beat display section This displays the parameters specified for the individual effects. When the [BEAT c, d] button is pressed, the corresponding beat fraction is displayed for 1 second. [. . . ] Is the driver software properly installed on your computer?Is the [CD/LINE, PHONO, LINE, USB */*] selector switch set to the proper position?24 En Problem Effect sound cannot be monitored even when the [CUE] button for [BEAT EFFECTS] is pressed. Sound is distorted when an analog player is connected to this unit’s [PHONO] terminals. [. . . ]